Mass air conversion

frank91lx

New Member
Jul 25, 2005
9
0
0
I have an 88 speed density car that I want to change over to mass air. I have aquirred a complete engine harness and ecm out of a 91lx. I installed the complete harness. The issue that I have is that the 91 harness has a grey connector by the ecm plug that the 88 car doesn't have. Where do I need to connect these wires to. I can get the other plug out of the donar car I just need to know where to wire it into.
Thanks Frank
 
Copied from bbunt302
Just for reference, here's a list of all the compatible years:

89 harness should work for 86-89 as long as you're using mass air.
90 harness will only work in a 90. (B/c of air bags and dual dash connectors)
91 through early 92 harnesses should be compatible (single dash connector, fuel pump relay under driver's seat)
Late 92 through 93 harnesses should be compatible (single dash connector, fuel pump relay under the hood)