me oil man

smoky · Jun 16, 2010

4.6 20.000 miles on it i put a new balancer damper on to tight dose or can this kill oil pump back off it oil psi 20 when it was to tight it was about 10 psi did diver it help me and yes im am slow or stupid yes slow

N8Dogg98 · Jun 16, 2010

smoky said:
4.6 20.000 miles on it i put a new balancer damper on to tight dose or can this kill oil pump back off it oil psi 20 when it was to tight it was about 10 psi did diver it help me and yes im am slow or stupid yes slow

Duh da naaa... WTF are you talking about!

smoky · Jun 16, 2010

ok thanks for being a i put a new damper on it low oil psi 10

streethorse · Jun 16, 2010

N8Dogg98 said:
Duh da naaa... WTF are you talking about!

easy boy.... hes obviously mentally handicapted.

smoky · Jun 16, 2010

yes i am thanks for all help so nice to see that u can help the mentally hadicapted i say that did i so go f no just look at u pick on the mentally good job

trinity_gt · Jun 16, 2010

If I understand what you're trying to say, you put a new damper on the crank and think you overtightened the crank bolt. With it like this you see 10psi and when you back off the bolt you see 20psi. Correct?

I don't think you can damage the oil pump by over-tightening the damper (you are more likely to strip the threads out of the crank snout or break the bolt...) You may damage it if you under-tighten it though... In either case, the oil pressure sounds too low.

Is the engine knocking at all? Why did you replace the damper? What sort of damper is it?

N8Dogg98 · Jun 16, 2010

smoky said:
yes i am thanks for all help so nice to see that u can help the mentally hadicapted i say that did i so go f no just look at u pick on the mentally good job

Sorry, that was an insensitive remark. Regardless, I still have no idea what you are asking for. Do you have any mechanic friends that perhaps can give you a hand or find someone who can help you ask your question on this forum?

fshawn50 · Jun 17, 2010

Sound's like he installed maybe some underdrive pullies? And they usually supply you a longer "Bolt" that's used to start pressing the crank pully back on. But its only to start the crank pully back on the snout? They say reuse the factory bolt? Which is shorter? So maybe was over tightened? Is there a spec. for the crank pully bolt torque?
hopefully help's?

trombonedemon · Jun 17, 2010

I really think he just a bad speller, gramatically thinking, installing underdrive pullies takes some pretty good enginuity that some "mentally capable" people won't tackle.
Low oil pressure could be caused by the obvious, low oil; but your oil would have to be extremely thin or extremely low.
Is this at idle or when reving the engine. How do you know that the oil pressure is low? The cluster gauge is useful if there is absolutely no oil in the car, its more of a switch if anything. Trinity or Burns has a procedure to reapply the damper/pulley. You might want to use some RTV sealant when putting back the bolt on the pulley. How is the car sounding. Kinda need more info before deciding if your problem is larger then what you expect it to be.
http://www.mustangworld.com/ourpics/fcar/pull1.htm

fast97gt · Jun 18, 2010

jeeze trombone, thats not stereo typing i dont know what is. buddie of mine runs a machine shop here in town and 1 of his employees is mentally handicap, and is a freakin geniuos when it come to engine work, though his speech and lack of ability to type on the computer. as well this guy, so dont under estimate someone you "think" is not as inteligent as you, you as well as i was will be extremely surprised

streethorse · Jun 18, 2010

fast97gt said:
jeeze trombone, thats not stereo typing i dont know what is. buddie of mine runs a machine shop here in town and 1 of his employees is mentally handicap, and is a freakin geniuos when it come to engine work, though his speech and lack of ability to type on the computer. as well this guy, so dont under estimate someone you "think" is not as inteligent as you, you as well as i was will be extremely surprised

Well I hope your right, that would be cool.... unless its somebnody just fn
with us.........

trombonedemon · Jun 18, 2010

fast97gt said:
jeeze trombone, thats not stereo typing i dont know what is. buddie of mine runs a machine shop here in town and 1 of his employees is mentally handicap, and is a freakin geniuos when it come to engine work, though his speech and lack of ability to type on the computer. as well this guy, so dont under estimate someone you "think" is not as inteligent as you, you as well as i was will be extremely surprised

What ever, read my post again, I said he wasn't stupid just a bad speller, gramatically thinking; quit tryin' to start a war, FYI I used to work w/the physically and mentally challenged people and loved every minute of the job, sounds like you should have been one my clients. Watch what you say, and we will be fine as I am always strapped for war.

fast97gt · Jun 18, 2010

trombonedemon said:
What ever, read my post again, I said he wasn't stupid just a bad speller, gramatically thinking; quit tryin' to start a war, FYI I used to work w/the physically and mentally challenged people and loved every minute of the job, sounds like you should have been one my clients. Watch what you say, and we will be fine as I am always strapped for war.

yea well i still do work with the mentally challenged, besides its wrong to even think of them as a "client" come on man, watch what you say before because you definitly choose the wrong words to make a statement. clients are you kidding.

smoky · Jun 18, 2010

THANK YOU AND GOOD BY I NEVER USE THIS AGIN SOME NICE BUT MUST BAD I DO NOT NEED THIS IS MY LIFE

fast97gt · Jun 18, 2010

sorry to see you go smoky, some people are just straight asses and need to be handled, and people wonder why were hated by most and despised by all. good job trombone and n8dog, freakin idiots i swear

trombonedemon · Jun 18, 2010

Ah well, I should've cried yesterday, anyway his problem w/his car wasn't severe, not gonna make me feel bad for helping someone and giving a compliment. May peace be w/you and journey my brief poster!

me oil man

smoky

New Member

N8Dogg98

smoky

New Member

streethorse

smoky

New Member

trinity_gt

N8Dogg98

fshawn50

Member

trombonedemon

Well-Known Member

fast97gt

Active Member

streethorse

trombonedemon

Well-Known Member

fast97gt

Active Member

smoky

New Member

fast97gt

Active Member

trombonedemon

Well-Known Member

Similar threads

me oil man

New Member

New Member

New Member

Member

Well-Known Member

Active Member

Well-Known Member

Active Member

New Member

Active Member

Well-Known Member

Similar threads

Privacy & Transparency

Privacy & Transparency