Melbourne area stangs

OrLackThereof · May 30, 2003

Hey, I'm gonna be Dave G. for a second...
Ohhh mannn I amm so drfunk!!

Only kidding. That was last night. But I do have a hangover. I think I'm going to conveniently reschedule my shift tonight and hopefully get my car back this evening from Gene's. I partied yesterday and today I'm too hung over for a water pump job....that and all the crap I'd have to remove to get to it...the hell with it. Had to have it towed there. Glad I didnt try to drive it because just turning it on and driving it onto the tow platform, the damn water pump seal let loose pretty good....it never would've made the drive. And I-95 would've blown my motor probably.

So ANYWAYS....is there AutoX this Saturday? I don't work and coming up for it it sounding like a pretty good idea right about now since I haven't been in weeks and weeks.

Ohh, and droptop....so most of your yellowing happens on the outside? Mine were sealed up for 12 years before drain holes were drilled in...it had water and crap in them...so I figured they'd yellowed out from the inside. Never thought to do anything to the outside.... I'll keep that in mind..thanks for the tip!

And finally, I apologize for the length of this post. I don't know what the hell I'm talking about right now. I'm still not walking straight.

droptop93 · May 30, 2003

Originally posted by OrLackThereof
Ohh, and droptop....so most of your yellowing happens on the outside? Mine were sealed up for 12 years before drain holes were drilled in...it had water and crap in them...so I figured they'd yellowed out from the inside. Never thought to do anything to the outside.... I'll keep that in mind..thanks for the tip!

Yea the actual yellowing is on the outside of the lens. Since you drilled drain holes in them (i did the same thing), there might be alittle bit of dirt n stuff inside the lens...which could be cleaned out pretty easy. But yea, all the yellowing is on the outside...and will all come off with alittle elbow-work.

eric kebbel · May 31, 2003

for us older folks

i have a really nice pair of chicago concert tickets for the king center tomorrow nite but my wife has to go out of town so if any body would like to go e mail me really quick

Wolfhound · May 31, 2003

Chicago????

J/K

Topstang2001 · May 31, 2003

Well TJ and Chris picked up my car today.Started it up to let Chris hear it and he goes get this...."It sounds exspensive" I was like why thanks for the enlightenment.It could be a rod.Thats great but o well.If it is a rod well im putting some modmax rods and pistons in instead of more stock stuff for I know I would just throw a rod again.Here comes more boost if it works out this way..wooo hooo!

Wolfhound · May 31, 2003

"it sounds expensive"

Thats great when somebody says that.

dg28182 · May 31, 2003

Throw Out Bearing..?

Something from underneath the hood starting squeeking today.. thought it was a belt, but it would stop when I pushed the clutch in, then return when I let the clutch out. I posted in the 6cyl. forum, and a guy said that he just had the same problem. Said it sounded like my throw out bearing is about to go.. and that my clutch would be soon behind it.
So this means I need a new clutch now?
I plan on doing the 5.0 swap in the not too distant future.. would it be wise to go with a more heavy duty clutch now so I don't have to replace another clutch when the swap actually happens?

OrLackThereof · Jun 1, 2003

I would. Why put some crappy stock clutch in now only to get the 5.0 and be constantly overheating your clutch from the newfound 5.0 power, and be disappointed in the softness of it, and then probably destroy it. Get some badass solid racing clutch and you'll be happy.

OrLackThereof · Jun 1, 2003

Clutches aint cheap though!!!

Topstang2001 · Jun 1, 2003

*coughcough* When you people gonna start posting in our forums?Its pretty damn lonely over there.

OrLackThereof · Jun 1, 2003

Yeah it is... I'm just being lazy.. And I worry that a massive amount of posts might overload the server...

Hey, anyone still have the link to the AutoX schedule online?? I lost it when I formatted my harddrive and I'd like to know when it's going on so I can catch the next one.

dg28182 · Jun 1, 2003

Originally posted by OrLackThereof
I would. Why put some crappy stock clutch in now only to get the 5.0 and be constantly overheating your clutch from the newfound 5.0 power, and be disappointed in the softness of it, and then probably destroy it. Get some badass solid racing clutch and you'll be happy.

The 5.0 uses a different clutch. I'd have to replace it again anyway. V6 has an 11" clutch, the 5.0 has a 10.5".

OrLackThereof · Jun 1, 2003

Gotta love that magic half inch....

Dave L....you got a part number on those heads? I've just about gone INSANE from the severe loss of power I'm getting here and your heads are starting to sound pretty sweet right about now....

Flash1966 · Jun 1, 2003

Re: Throw Out Bearing..?

Originally posted by dg28182
Something from underneath the hood starting squeeking today.. thought it was a belt, but it would stop when I pushed the clutch in, then return when I let the clutch out. I posted in the 6cyl. forum, and a guy said that he just had the same problem. Said it sounded like my throw out bearing is about to go.. and that my clutch would be soon behind it.
So this means I need a new clutch now?
I plan on doing the 5.0 swap in the not too distant future.. would it be wise to go with a more heavy duty clutch now so I don't have to replace another clutch when the swap actually happens?

I've been hearing my throwout bearing squeak for about 10k miles now so if yours has just started making noise, theres a good chance you've still got some life left in your clutch. If moneys tight, dont fix it unless its really broke.

dg28182 · Jun 1, 2003

I hope you're right. Money is tight right now and I can't afford to replace the clutch. This kinda sucks.. and it makes one hell of an annoying noise too.

tooler · Jun 2, 2003

Hey Dan (baglock), can you tell us some more about your experience with the Evolution driving school? How much was it? It might make a good birthday present for me. They're coming at the end of June and beginning of August. The June event might be sold out already.

Bringing my own car worries me though. I have a feeling something would break the night before.

tooler · Jun 2, 2003

I talked to the Palm Bay contact, Jkinser77@aol.com. S/he said there were two spots left for June 28th/29th. You interested, Glenn?

The schedule doesn't show them coming back in August anymore.

5.0's 4 ever · Jun 2, 2003

Its not always smart to test a throwout bearing though. Two people that I know with SN95 GTs had their throwout bearing starting to make noise, lasted about a week before the bearing totally seized up and just came apart. You don't want this to happen while you are driving down a road.

Glenn88lx · Jun 2, 2003

Originally posted by tooler
I talked to the Palm Bay contact, Jkinser77@aol.com. S/he said there were two spots left for June 28th/29th. You interested, Glenn?

The schedule doesn't show them coming back in August anymore.

Yes Tim, I am interested. Did they say how much it cost? I will have to check my calendar but I think I can spare the time for the school.

baglock1 · Jun 2, 2003

Originally posted by tooler
Hey Dan (baglock), can you tell us some more about your experience with the Evolution driving school? How much was it? It might make a good birthday present for me. They're coming at the end of June and beginning of August. The June event might be sold out already.

What would you like to know? All in all, I felt it was money well spent ($200 a day, unless they're having a discount). Got lots of seat time and some good pointers.

My only complaint (and it's really not a complaint) is that they really didn't point out anything bad about my technique that I didn't know I needed to improve. I just wasn't aware it was holding me back THAT much. None the less, for $200, bucks I felt it was worth it. I ended up getting something like 30 runs. Their phase I course is very mustang friendly too.

If you want any specifics, let me know.

Melbourne area stangs

OrLackThereof

New Member

droptop93

eric kebbel

Wolfhound

Topstang2001

New Member

Wolfhound

dg28182

OrLackThereof

New Member

OrLackThereof

New Member

Topstang2001

New Member

OrLackThereof

New Member

dg28182

OrLackThereof

New Member

Flash1966

dg28182

tooler

tooler

5.0's 4 ever

The #1 Stunna

Glenn88lx

baglock1

The Bartender

Similar threads

Melbourne area stangs

New Member

New Member

New Member

New Member

New Member

New Member

New Member

The #1 Stunna

The Bartender

Similar threads

Privacy & Transparency

Privacy & Transparency