• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

Mileage Gauge And Radio Display Sims With Headlights On

  • Thread starter Thread starter Suek
  • Start date Start date Sep 22, 2013
  • 1
  • 2
Next
1 of 2 Next Last
S

Suek

Member
Jul 11, 2013
64
3
19
Sep 22, 2013
#1
  • Sep 22, 2013
  • #1
Hi,
I already checked the alternator at Auto zone, It's fine. During the day the mileage gauge and the radio display dims when I turn the headlights on. I have searched all over the internet. Plus when I took the cluster out the knob where there's some metal piece it was very hot. Maybe that's normal, Who knows. Thanks to whoever replies.
 

85rkyboby

Active Member
Mar 2, 2011
923
96
39
South ATL
Sep 22, 2013
#2
  • Sep 22, 2013
  • #2
I hear the grounds can cause dim dash lights.
 
S

Suek

Member
Jul 11, 2013
64
3
19
Sep 22, 2013
#3
  • Sep 22, 2013
  • #3
85rkyboby said:
I hear the grounds can cause dim dash lights.
Click to expand...
Yes that would make sense. Now where to start. HAHAHAHAHA Thank you! Maybe that can explain why my gas gauge needle acts funny and vibrates when down to 1/4. Not all the time though. Just had the sending unit and fuel pimp changed. Always something to figure out. Lol
 

85rkyboby

Active Member
Mar 2, 2011
923
96
39
South ATL
Sep 22, 2013
#4
  • Sep 22, 2013
  • #4
Ha-ha I always check the simple stuff first. I suggest using an extra 4g wire on the ground.
Quote @Grabbin' Asphalt
"Neg battery cable connects to block under the oil filter-ish area toward water pump. Stack the extra 4awg ground there and run it near the battery fenderwell beside the washer fluid refill. You will already see a small ground there, just stack it. The other is rear of the intake near pvc valve connects to firewall near the brake booster in the open."

I have to give him the credit as I just learned this the other night.
 

85rkyboby

Active Member
Mar 2, 2011
923
96
39
South ATL
Sep 22, 2013
#5
  • Sep 22, 2013
  • #5
The ground by the firewall and intake is the one that helps with dash lights.
 
S

Suek

Member
Jul 11, 2013
64
3
19
Sep 22, 2013
#6
  • Sep 22, 2013
  • #6
85rkyboby said:
The ground by the firewall and intake is the one that helps with dash lights.
Click to expand...
This is excellent thank you for taking the time. I truly appreciate it. I'm happy to find some intelligent answers. I like the ones a person gets like "Take it to the dealership" HAHAHAHAHA Ya right. I won't do that till I'm REALLY desperate. Thanks again.
 

85rkyboby

Active Member
Mar 2, 2011
923
96
39
South ATL
Sep 22, 2013
#7
  • Sep 22, 2013
  • #7
No problem try it out and let us know.
 
S

Suek

Member
Jul 11, 2013
64
3
19
Sep 22, 2013
#8
  • Sep 22, 2013
  • #8
85rkyboby said:
No problem try it out and let us know.
Click to expand...
I will. I have a couple other things to first. It may be a while. Lol I just got the car a couple months ago and I'm going through it checking things out. I just got rid of a 2008 Dodge Avenger that was my first new car and my last. I've had used cars that ran better than that thing. So I went backwards and said screw it I'm buying an older Mustang. Thanks again.
 

85rkyboby

Active Member
Mar 2, 2011
923
96
39
South ATL
Sep 22, 2013
#9
  • Sep 22, 2013
  • #9
Alright have fun with your new baby.
 

Grabbin' Asphalt

10 Year Member
Jun 10, 2013
2,029
310
124
Atlanta, Ga
Sep 22, 2013
#10
  • Sep 22, 2013
  • #10
If you still have the stock 2g alternator, it's very common for dimming with lights, stereo, electric fan etc cause its just a weak charging system. If already upgraded recheck those grounds. But still plan for the upgrade if you haven't yet because of the stock plug fire hazzard
 
S

Suek

Member
Jul 11, 2013
64
3
19
Sep 22, 2013
#11
  • Sep 22, 2013
  • #11
85rkyboby said:
Alright have fun with your new baby.
Click to expand...
85rkyboby said:
Alright have fun with your new baby.
Click to expand...
Thanks and you also.
 
Reactions: 85rkyboby
S

Suek

Member
Jul 11, 2013
64
3
19
Sep 22, 2013
#12
  • Sep 22, 2013
  • #12
Grabbin' Asphalt said:
If you still have the stock 2g alternator, it's very common for dimming with lights, stereo, electric fan etc cause its just a weak charging system. If already upgraded recheck those grounds. But still plan for the upgrade if you haven't yet because of the stock plug fire hazzard
Click to expand...
No kidding, Holy cow. I'll have to see if any of the service papers say whether it was replaced or not. I read somewhere about a 3 g. Is that the upgrade? Probably not. Thank you very much.
 
S

Suek

Member
Jul 11, 2013
64
3
19
Sep 22, 2013
#13
  • Sep 22, 2013
  • #13
Suek said:
Yes that would make sense. Now where to start. HAHAHAHAHA Thank you! Maybe that can explain why my gas gauge needle acts funny and vibrates when down to 1/4. Not all the time though. Just had the sending unit and fuel pimp changed. Always something to figure out. Lol
Click to expand...
HAHAHAHAHAHA! I wrote I had the "Pimp" changed...HAHHAAHHAHA Ya and his old lady too.
 
Reactions: 85rkyboby

Grabbin' Asphalt

10 Year Member
Jun 10, 2013
2,029
310
124
Atlanta, Ga
Sep 22, 2013
#14
  • Sep 22, 2013
  • #14
Suek said:
No kidding, Holy cow. I'll have to see if any of the service papers say whether it was replaced or not. I read somewhere about a 3 g. Is that the upgrade? Probably not. Thank you very much.[/
Click to expand...
Use the Stangnet sesrch " my 3g upgrade" has some pics of my melting plug. Then you can check yours and know what to look for.
 
S

Suek

Member
Jul 11, 2013
64
3
19
Sep 23, 2013
#15
  • Sep 23, 2013
  • #15
Grabbin' Asphalt said:
Use the Stangnet sesrch " my 3g upgrade" has some pics of my melting plug. Then you can check yours and know what to look for.
Click to expand...
Thanks, Sounds like a great generator HAHAHAHAHAHAHA I appreciate the help.
 
S

Suek

Member
Jul 11, 2013
64
3
19
Sep 23, 2013
#16
  • Sep 23, 2013
  • #16
Grabbin' Asphalt said:
Use the Stangnet sesrch " my 3g upgrade" has some pics of my melting plug. Then you can check yours and know what to look for.
Click to expand...
Wow! What a great find. See that's what I'm looking for in a forum, Everyone helps each other. If I know something I'm going to share it. Good work.
 
C

creektrack

Member
May 17, 2013
156
4
19
Sep 23, 2013
#17
  • Sep 23, 2013
  • #17
Dont mean to thread jack, but im having a super hard time finding the ground that goes to the firewall....can someone please post a pic of it? I think thats where my ground issue is as well...

Sent from my SPH-L900 using Tapatalk 2
 
S

Suek

Member
Jul 11, 2013
64
3
19
Sep 23, 2013
#18
  • Sep 23, 2013
  • #18
creektrack said:
Dont mean to thread jack, but im having a super hard time finding the ground that goes to the firewall....can someone please post a pic of it? I think thats where my ground issue is as well...

Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Oh I don't really care about highjacking, If you need help I understand that. When I want to solve something it can drive me insane. HAHAHAHA
 

Grabbin' Asphalt

10 Year Member
Jun 10, 2013
2,029
310
124
Atlanta, Ga
Sep 23, 2013
#19
  • Sep 23, 2013
  • #19
Well I'm speaking of a Fox mustang with the rear intake/firewall ground. I'm not sure if that applirs to '94-'95, I know there are some minor differeces however. TFI remote mounted etc, but on a Fox the rear intake bolt beside the pvc valve is where it connects, then it runs to a bolt on the firewallgoing towards the brake booster but out in the open. Many times people just have it missing.
 
C

creektrack

Member
May 17, 2013
156
4
19
Sep 23, 2013
#20
  • Sep 23, 2013
  • #20
Mines a 96 gt....I noticed a bolt sticking up on the back side of my intake manifold that has nothing on it, looks like its backed out a little, and its directly in the middle behind the plenum...I doubt thats the location as the intake is plastic, but could that be the ground location?

Sent from my SPH-L900 using Tapatalk 2
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Electrical Gauge cluster woes...
  • 90sickfox
  • Oct 6, 2022
  • Fox 5.0 Mustang Tech
Replies
4
Views
2K
Fox 5.0 Mustang Tech Oct 8, 2022
90sickfox
2004 Mach 1 crank but no start. dying inside
  • gavinmgrant
  • May 23, 2022
  • SN95 4.6L Mustang Tech
  • 2 3
Replies
50
Views
10K
SN95 4.6L Mustang Tech Jun 11, 2022
Mach1.0
M
J
Electrical No crank no dash no nothing, troubleshooting leads to more questions
  • Jojam99
  • Jun 2, 2022
  • 1994 - 1995 Specific Tech
Replies
1
Views
3K
1994 - 1995 Specific Tech Jun 2, 2022
Jojam99
J
Engine How to test an aftermarket mechanical water temp gauge
  • MrPerfect2
  • Sep 4, 2019
  • Fox 5.0 Mustang Tech
Replies
14
Views
11K
Fox 5.0 Mustang Tech Sep 5, 2019
MrPerfect2
V
A 20 year old car, with many faults!
  • Virus101
  • May 4, 2020
  • SN95 4.6L Mustang Tech
Replies
7
Views
2K
SN95 4.6L Mustang Tech May 9, 2020
Cobra262
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?