Fox MODS question

knr1313 · Sep 14, 2019

92 fox gt vert 5spd
can i use 40# inj on a mild cam motor stock upper and lower and heads ? will it run rich? will it hurt?

Deleted member 215073 · Sep 14, 2019

Are you planning on getting a MAF to match?

knr1313 · Sep 14, 2019

JMGlasgow said:
Are you planning on getting a MAF to match?

will that help?
i do have a A9L & X3Z pcm and a set of 24# inj + AFH70 MAF + BBK TB would that be a better set up ? which pcm should i run with ?

Deleted member 215073 · Sep 14, 2019

Either a MAF that is calibrated for your injectors or a custom tune. Otherwise you'll be running rich.

knr1313 · Sep 14, 2019

?

JMGlasgow said:
Either a MAF that is calibrated for your injectors or a custom tune. Otherwise you'll be running rich.

thanks for the help JMG
so can i use the 24# inj if i use the f1sf-12b579-aa - AFH70-02 MAF and the A9L ? with out running to rich? or should i find some 19# inj and call it a day

Deleted member 215073 · Sep 14, 2019

I'm not familiar with that MAF, what is it out of?

knr1313 · Sep 14, 2019

JMGlasgow said:
I'm not familiar with that MAF, what is it out of?

ppl say 93 cobra

Wayne Waldrep · Sep 15, 2019

First off, you say you have stock upper and lower intake and stock heads, correct? So just a mild cam? What exactly are you trying to accomplish? Per your list you don't need more fuel.

Wayne Waldrep · Sep 15, 2019

knr1313 said:
?
thanks for the help JMG
so can i use the 24# inj if i use the f1sf-12b579-aa - AFH70-02 MAF and the A9L ? with out running to rich? or should i find some 19# inj and call it a day

No.

knr1313 · Sep 15, 2019

Wayne Waldrep said:
No.

i hate to be all over the place but i'm trying to see if this will be beneficial to me
right now this is what i have
BBK shorty
NO CATS JUST FLOWMASTERS
mild cam think its a B303
CAI
PULLEYS
NO A/C
NO AIR PUMP

this is what i have as as extra parts
70mm maf with F1SF-12B579-AA AFH-70-02 3C19
BBK 70MM TB
X3Z ecm
FORD (DENSO) 24# F55E-A2E inj
FORD explorer GT40 UPPER AND LOWER INTAKE

General karthief · Sep 15, 2019

If the maf sensor was F1ZF I would say yes but I can't say about a F1SF sensor
everything on your list will be 'ok' but the B cam is a little high strung and may be a dog in the lower rpms, more so with the stock heads. JMO

a91what · Sep 15, 2019

The 93 cobra ecu was programmed for 24# injectors, the maf is designed for a larger 70mm housing if I am not mistaken. There is no stock maf designed for use with 24# injectors, you will either need a tune to change the fuel curve in the ECU or an aftermarket maf designed to (lie) to the ecu for the larger injectors.
For your setup just run the 19# injectors and call it a day.

stanglx2002 · Sep 15, 2019

a91what said:
The 93 cobra ecu was programmed for 24# injectors, the maf is designed for a larger 70mm housing if I am not mistaken. There is no stock maf designed for use with 24# injectors, you will either need a tune to change the fuel curve in the ECU or an aftermarket maf designed to (lie) to the ecu for the larger injectors.
For your setup just run the 19# injectors and call it a day.

I agree with the post above since the 19's you have now will be plenty for the combo you have laid out. You are just better off putting the intake and tb on the car and running it.

Wayne Waldrep · Sep 15, 2019

Hmmm...I looked up the MAF part number you gave and for me it came back as a 93 Cobra. So I'll bow out of this conversation. The answer is above anyway.

Mustang5L5 · Sep 15, 2019

Wayne Waldrep said:
Hmmm...I looked up the MAF part number you gave and for me it came back as a 93 Cobra. So I'll bow out of this conversation. The answer is above anyway.

Dammit. I was incorrect. It is a 93 cobra MAF.

Personally what I’d do is install the explorer intake, put the cobra ECU, 24s and MAF aside.

If the BBK MAF is for 19s I’d try to run it but if not sell it and buy a 94-95 MAF and run that

knr1313 · Sep 15, 2019

Mustang5L5 said:
Dammit. I was incorrect. It is a 93 cobra MAF.

Personally what I’d do is install the explorer intake, put the cobra ECU, 24s and MAF aside.

If the BBK MAF is for 19s I’d try to run it but if not sell it and buy a 94-95 MAF and run that

thanks for your reply but why not use the F1SF - ASF70 and why would the 94-95 MAF be better with my add on parts

96pushrod · Sep 15, 2019

Mustang5L5 said:
Dammit. I was incorrect. It is a 93 cobra MAF.

Personally what I’d do is install the explorer intake, put the cobra ECU, 24s and MAF aside.

If the BBK MAF is for 19s I’d try to run it but if not sell it and buy a 94-95 MAF and run that

He could always put cobra maf, computer, and the 24lb injectors in and it’ll run fine.

With just a cam and explorer intake, the 19lb injectors will be fine though.

General karthief · Sep 15, 2019

I think you will not notice the difference between the two combinations.

Wayne Waldrep · Sep 15, 2019

General karthief said:
I think you will not notice the difference between the two combinations.

Me either!

Wayne Waldrep · Sep 15, 2019

Mustang5L5 said:
Dammit. I was incorrect. It is a 93 cobra MAF.

Personally what I’d do is install the explorer intake, put the cobra ECU, 24s and MAF aside.

If the BBK MAF is for 19s I’d try to run it but if not sell it and buy a 94-95 MAF and run that

Whew...I thought my Googler was broken.

Fox MODS question

knr1313

Member

Deleted member 215073

knr1313

Member

Deleted member 215073

knr1313

Member

Deleted member 215073

knr1313

Member

Wayne Waldrep

Before I post a pic, do you have one of yours?

Wayne Waldrep

Before I post a pic, do you have one of yours?

knr1313

Member

General karthief

wonder how much it would cost to ship you a pair

a91what

SendMeUrDataLog

stanglx2002

CT Material here

Wayne Waldrep

Before I post a pic, do you have one of yours?

Mustang5L5

That is…until I whipped out my Bissell

knr1313

Member

96pushrod

I think they're a little easier to get off

General karthief

wonder how much it would cost to ship you a pair

Wayne Waldrep

Before I post a pic, do you have one of yours?

Wayne Waldrep

Before I post a pic, do you have one of yours?

Similar threads

Fox MODS question

Member

Deleted member 215073

Member

Deleted member 215073

Member

Deleted member 215073

Member

Before I post a pic, do you have one of yours?

Before I post a pic, do you have one of yours?

Member

wonder how much it would cost to ship you a pair

SendMeUrDataLog

CT Material here

Before I post a pic, do you have one of yours?

That is…until I whipped out my Bissell

Member

I think they're a little easier to get off

wonder how much it would cost to ship you a pair

Before I post a pic, do you have one of yours?

Before I post a pic, do you have one of yours?

Similar threads

Privacy & Transparency

Privacy & Transparency