Msd Ignition Install

kpack5982

Yeah, it was pretty stiff, but eventually a buddy

Jul 13, 2005

325

1

19

Granger, IA

Jul 20, 2005

#1

• Jul 20, 2005

• #1

So i'm about to put in an msd blaster 2 coil into my mustang and I can't figure out where the hell the wires go and which diagram to use because I have a 6a msd box already connected to the stock distributor and coil? Any clue at all how I wire this mo fo. Any help asap would be nice, i'd like to get it done before Dark

 

marine_2003

Member

Jun 6, 2005

427

0

16

Lake County, FL

Jul 20, 2005

#2

• Jul 20, 2005

• #2

There should be a black and orange set of wires coming out of your 6a box, connect the orange one to the positive side of your blaster 2 and the black to the neg side, hook up the wire from the distributor to the coil and it should start up.

 

kpack5982

Yeah, it was pretty stiff, but eventually a buddy

Jul 13, 2005

325

1

19

Granger, IA

Jul 20, 2005

#3

• Jul 20, 2005

• #3

so you leave the stock coil in there or what?

 

kpack5982

Yeah, it was pretty stiff, but eventually a buddy

Jul 13, 2005

325

1

19

Granger, IA

Jul 20, 2005

#4

• Jul 20, 2005

• #4

also how do you mount the blaster coil?

 

marine_2003

Member

Jun 6, 2005

427

0

16

Lake County, FL

Jul 20, 2005

#5

• Jul 20, 2005

• #5

take the stock coil out and there is a mounting bracket that MSD makes that your local parts house Advance Auto parts or whoever should have that runs about $6.00 if you click on my car domain page, and enlarge the engine photo you can see the mounting bracket.