Muffler clamp Q. Flowmaster catback (PIC)

STREETFIGHTER50 · Sep 17, 2008

I just bought a slightly used Flowmaster American Thunder catback. It's missing the 2 muffler clamps & I was wondering if these would work. I don't wanna have to get anything welded at the muffler shop. Anyone ever use these lap joint clamps? Think these would work better than the standard clamps?
http://static.summitracing.com/global/images/prod/large/wlk-33226.jpg
http://store.summitracing.com/partdetail.asp?autofilter=1&part=WLK-33226&N=700+0&autoview=sku

jd-hart · Sep 17, 2008

I think those clamps work very well. The only problem I have seen with them, is sometimes there isn't enough clearance around where you are trying to clamp. Like if a hanger is welded to the pipe close to the clamp. Sometimes they are too big. I had this problem on my X-pipe.

93 LX · Sep 17, 2008

just go get the muffler U-bolts from the parts store.. 3 bucks for one and your done...

STREETFIGHTER50 · Sep 19, 2008

93 LX said:
just go get the muffler U-bolts from the parts store.. 3 bucks for one and your done...

those crimp down on ur piping

93 LX · Sep 19, 2008

yeah they do if you over torque them. I have them and they work fine without crimping my pipes.

04gtboy · Sep 19, 2008

Those clamps came with my slp h pipe on my 04 and my magnaflow catback on my 90 and they worked great no problems . I think u clamps make it harder to get exhaust back apart !

Muffler clamp Q. Flowmaster catback (PIC)

STREETFIGHTER50

jd-hart

Member

93 LX

STREETFIGHTER50

93 LX

04gtboy

New Member

Similar threads

Muffler clamp Q. Flowmaster catback (PIC)

STREETFIGHTER50

jd-hart

Member

93 LX

STREETFIGHTER50

93 LX

04gtboy

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency