• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Mustang lost power after 4.10

  • Thread starter Thread starter Snake-Eye
  • Start date Start date Aug 24, 2010

Snake-Eye

New Member
Jan 11, 2010
21
0
0
Bahrain
Aug 24, 2010
#1
  • Aug 24, 2010
  • #1
Hi Guys,

So here is my story: I installed my FRPP 4.10 gears about 3 weeks ago after 1-2 days of installing it the car lost alot of power it feels that im driving a stock mustang !!!!

Car specs :

-05 Mustang Gt has around 93,000 miles on (150K Km)
-FR cold air intake
-SLP muffler delete
-4.10 FRPP Gears
- DS custom tune
- 305/45/18 drag radials


What I've done right after the Gear installation

- Changed the axle ratio on the tuner from a 3.55 to 4.10 (Didn't add or change any premeters except for the axle ratio, the fuel to air ratio is the same )
- Cleaned TB

Please dont tell me your tires are too big,

i ran the same tires on the 3.55 and frankly speaking i don't see or feel much difference with 4.10

Is it possible that my engine is loosing its compression ??
or do i need to retune ?? or what ???


One more thing anyone has access to a DS tuner in case i need to retune ??


Thank you in advance guys
 

ct07gt

Member
Feb 14, 2008
377
0
16
Aug 24, 2010
#2
  • Aug 24, 2010
  • #2
When you changed the axle ratio on the tuner did it upload the stock tune instead of the custom tune? I know you said it did not change the A/F ratio, but it is the only thing I can think of. There should not be any mechanical reason you would feel a decrease in performance, so it has to be a tune issue I would think. If you can't get it figured out, call VMP or JDM to see if they can send you a tune.
 

klaw

Member
Oct 11, 2007
343
0
16
Calgary, Alberta, Canada
Aug 24, 2010
#3
  • Aug 24, 2010
  • #3
Are you driving with the traction control on or off? Is it possible that you break the rear loose easier with the 4.10's and therefore the TCS kicks in and "modulates" the power?
 

Snake-Eye

New Member
Jan 11, 2010
21
0
0
Bahrain
Aug 24, 2010
#4
  • Aug 24, 2010
  • #4
I don't think it uploaded the stock tune cause I edit the performance tune

And I always drive with the traction off !

I thought of taking it back to the dyno and retune the whole thing over

Let's just hope it's not the engine

Thanx guys !
 
M

mjk

Member
Jun 22, 2006
87
0
17
NE IL
Sep 2, 2010
#5
  • Sep 2, 2010
  • #5
maybe its the tb? just throwing out ideas... but "Id re-load the tune just to be sure about the tune, also make sure you dont have any air leaks in your intake.
 
R

Redfire281

Member
Nov 28, 2007
39
0
7
Sep 3, 2010
#6
  • Sep 3, 2010
  • #6
If it didn't act up until 1 or 2 days after the gears/modified tune install, I would not think it's in the tune.
 
M

mrdeath2000

New Member
Jun 30, 2007
3
0
0
Surprise, AZ
Sep 3, 2010
#7
  • Sep 3, 2010
  • #7
are the gears new? or used from a 3rd party?
if they are used, are you sure its a 4.10 and not a 3.31?

try switching the tune back to 3.55 and see if there is a difference.
 

SpartaPerformance

10 Year Member
Nov 5, 2006
2,517
61
89
Long Island NY
Sep 3, 2010
#8
  • Sep 3, 2010
  • #8
Is it an automatic? If so it may be a tune the parameter you cahnge on the hand held only re calibrates the speedo it does not change the shift points for the new gears. My $0.02
 

gmantheman

Member
Dec 30, 2007
483
1
16
Escondido, CA
Sep 3, 2010
#9
  • Sep 3, 2010
  • #9
If he had 3.55s before, I doubt it's an auto. Something doesn't seem right. Last week I drove my friend's 05 with a dyno tune and 3.55s. The car was fast but it didn't have the acceleration of my car with the 4.10s.
 

DarkFireGT

Playing with my wife's really makes me want one.
10 Year Member
May 23, 2004
692
10
89
East Moline, IL
Sep 4, 2010
#10
  • Sep 4, 2010
  • #10
Have you tried reflashing your tune? Sometimes tunes just don't "take" and require a second reflash. It doesn't happen often, but I have experienced it before.
 

SpartaPerformance

10 Year Member
Nov 5, 2006
2,517
61
89
Long Island NY
Sep 4, 2010
#11
  • Sep 4, 2010
  • #11
DarkFireGT said:
Have you tried reflashing your tune? Sometimes tunes just don't "take" and require a second reflash. It doesn't happen often, but I have experienced it before.
Click to expand...

Brain farts!! Gotta love 'em!
 
C

chefalan25

New Member
Nov 2, 2008
6
0
1
Sep 5, 2010
#12
  • Sep 5, 2010
  • #12
this is just a shot in the dark, but try disconnecting your battery cable for a few minutes, then try to reinstall the tune. maybe something wierd happened with your ecu and its pulling timing.
 

Snake-Eye

New Member
Jan 11, 2010
21
0
0
Bahrain
Sep 6, 2010
#13
  • Sep 6, 2010
  • #13
Heeey Guys,

Thank you all for the wonderful feedback,

I haven't really found the time to do all that,

As DarkFireGT's said...i will be reloading the tune, and also checking my engine's compression,


@ mrdeath2000 : Nope dude it's a brand new FRPP 4.10

@ SpartaPerformance : It a manual .


Thanx again guys !!
 

Snake-Eye

New Member
Jan 11, 2010
21
0
0
Bahrain
Sep 6, 2010
#14
  • Sep 6, 2010
  • #14
Heeey Guys,

Thank you all for the wonderful feedback,

I haven't really found the time to do all that,

As DarkFireGT's said...i will be reloading the tune, and also checking my engine's compression,


@ mrdeath2000 : Nope dude it's a brand new FRPP 4.10

@ SpartaPerformance : It a manual .


Thanx again guys !!
 
You must log in or register to reply here.

Similar threads

Tuners come on inside
  • squeak93
  • Feb 13, 2026
  • SVT Tech Forum
Replies
1
Views
256
SVT Tech Forum Feb 20, 2026
squeak93
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
573
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
G
Expired 2013 Ford Mustang V6 (Grabber Blue) 3:55 gears... Excellent Condition.
  • Grabberblueguy77
  • Nov 19, 2025
  • S197 Mustangs For Sale (2005-14)
Replies
2
Views
464
S197 Mustangs For Sale (2005-14) Mar 11, 2026
Grabberblueguy77
G
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
576
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
J
Engine LOSS OF POWER AT 4,000 RPM.
  • Jarhead67
  • Nov 17, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
38
Views
2K
Fox 5.0 Mustang Tech Jan 25, 2025
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?