I am about to start a resto (again) on my 67 coupe. Figured I'd start a thread to hold me accountable to make progress
A little background first. Since we have a lot of new members, and I have not posted in years.
I bought the car in 2002 when i was still in the service. I got out of the service in 2003. Was towing it back home when my tow vehicle developed a bit of a hole in the block. Luckily the mustang had a freshly built 351w (same engine as the truck I was towing with)
Did a quick parking lot engine swap (heavy sarcasm about quick).
Completed my trip from New Mexico to Oregon.
Unfortunately that was the last time a running engine has been in my mustang.
I spent the next 15 years going to school, raising kids (twins slow projects down btw), and starting a career. I spent way too long in rentals with small garages, then buying a house with a garage that was slightly bigger but not large enough.
Fast forward to the end of last year. I was blessed enough to talk my wife into buying a house with a shop the size of my last house.
I have finally reached equilibrium with child rearing, career, and hobbies. (Only took 15 years)
So here is my project.
I rebuilt the front and back suspension in 2002. Did a shelby drop, granada brake swap.
I also por 15'd the underside and engine bay.
The por 15 held up very well, except for the interior.floor pans. It flaked and I had to strip it down.
The car sat uncovered for 2 years while we had our last house on and off the market to sell. Where it managed to grow some moss and gain some wasps.
Considering it sat for so long, it's in remarkable good shape.
For the tldr crowd. Projects sometimes take a long time. Here are some pics
A little background first. Since we have a lot of new members, and I have not posted in years.
I bought the car in 2002 when i was still in the service. I got out of the service in 2003. Was towing it back home when my tow vehicle developed a bit of a hole in the block. Luckily the mustang had a freshly built 351w (same engine as the truck I was towing with)
Did a quick parking lot engine swap (heavy sarcasm about quick).
Completed my trip from New Mexico to Oregon.
Unfortunately that was the last time a running engine has been in my mustang.
I spent the next 15 years going to school, raising kids (twins slow projects down btw), and starting a career. I spent way too long in rentals with small garages, then buying a house with a garage that was slightly bigger but not large enough.
Fast forward to the end of last year. I was blessed enough to talk my wife into buying a house with a shop the size of my last house.
I have finally reached equilibrium with child rearing, career, and hobbies. (Only took 15 years)
So here is my project.
I rebuilt the front and back suspension in 2002. Did a shelby drop, granada brake swap.
I also por 15'd the underside and engine bay.
The por 15 held up very well, except for the interior.floor pans. It flaked and I had to strip it down.
The car sat uncovered for 2 years while we had our last house on and off the market to sell. Where it managed to grow some moss and gain some wasps.
Considering it sat for so long, it's in remarkable good shape.
For the tldr crowd. Projects sometimes take a long time. Here are some pics