• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

my blower motor doesnt work

  • Thread starter Thread starter blue87lx
  • Start date Start date Sep 29, 2005
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Sep 29, 2005
#1
  • Sep 29, 2005
  • #1
today was a cold morning and when i turned my heat on and the fan to hi i got nothing. got home today and look4ed into it alittle. im getting power at the switch but my motor just isnt coming on. what should i do?
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Sep 29, 2005
#2
  • Sep 29, 2005
  • #2
Sounds to me like your blower motor resistor is bad. Its located under the glove box, screwed into the heater case near the motor. Look for a rectangle shape with a screw going through each end and a square plug in. Remove it and it should have some coils on the other side. Check for power in and out of it to be sure though.
 

darthcual

Member
Mar 31, 2005
985
19
18
Arlington, TX
Sep 29, 2005
#3
  • Sep 29, 2005
  • #3
Buy new car. No, um is it working on the other settings? you sed u turned it to high and it didnt work. How about a fuse? Are other electrical problems happening? Do you want some food? how about a pie? Okay thats going off topic i'm just really hungry.
 
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Sep 29, 2005
#4
  • Sep 29, 2005
  • #4
doesnt work on other settings fuse is fine
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Sep 29, 2005
#5
  • Sep 29, 2005
  • #5
If the resistor was bad it would only work in high, becaue the resistor is bypassed on hi. (full power). Unless of course it is so fried the wiring is the problem. Are you getting power to the motor? If so are you getting ground from the motor? If so you have a bad blower motor.
 

iskwezm

10 Year Member
May 24, 2005
4,159
20
79
Rowland Heights,California
Sep 29, 2005
#6
  • Sep 29, 2005
  • #6
yeah cheack for power at the motor,,like it was said,if it only worked on high,the blower speed resistor is bad,if you have power,try to smack the motor with a mallet,it might have a burn spot on the armature.
 
You must log in or register to reply here.

Similar threads

D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
203
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
Electrical Lincoln Mark VIII Replacement Fan Motor
  • AeroCoupe
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
167
Fox 5.0 Mustang Tech Sep 26, 2026
AeroCoupe
Resolved Wiring electric fan
  • cbac89
  • Aug 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
233
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
cbac89
Engine Coolant boiling in hose?
  • Teen'93stang5.0
  • Jun 3, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
340
Fox 5.0 Mustang Tech Jun 8, 2026
Mustang5L5
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
3
Views
358
2005 - 2009 Specific Tech Sep 26, 2026
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?