Boostedpimp
20+ Year Stangneter 

thanks for the help and good wishes guys, my life doesn't really suck i was just angry and disappointed haha
if i order this March Performance 1465 - March Performance Alternator Brackets - summitracing.com will i need to order anything else to delete the smog, do i NEED to buy that smog eliminator pulley or block off plate??
and what the hell is a thermactor plug? etc.
If you have a stock h pipe then deleting the smog pump will eventually cause the stock h pipe to over heat and either clog or catch on fire... if you don't have it then simply unbolt that pos smog pump pulley, there's two lines that go from it to the back of each head.. that's where you need the "thermactor plug" just take those lines with you to a hardware store and get plugs the same size. Plug each head, install your new march bracket which is cake and new shorter belt and your done.
Smog pump was dyno proven to rob either 3 or 4 rwhp.. it was in one of my old mmff mags
and no you don't need one of those stupid smog pump eliminator pulleys if you just use a shorter belt. Use a piece of string and wrap it around the remaining pulleys in the direction you'll be installing the belt.. mark it and bring the string with you and have autozone or whoever find you the same size or close to then put it on and adjust it tight by moving the march adjustment rod out more.
it's cake
) and it was better than waiting for the one i found o ebay to come in the mail... but now i have a question


