Hey guys , here is my problem , at idle my throw out bearing and fork are wobbling, when the clutch is pressed there is no noticeable wobble in either the bearing or fork, my pressure plate is good and the bearing retainer has low miles om it as it was replaced with a steel one along with a pivot ball and ford 50 ounce fly wheel.
When i get on it on low rpms i feel a shake but when going up in the gears on the highway shes smooth. I did take a video but i don't know if its even worth watching but any info is good info .
Also i,ll add that this clutch is under warranty and i can take it back to have them look at it but don't want them to say that "you need this and that done and will cost extra $" , what could be the problem here.
When i get on it on low rpms i feel a shake but when going up in the gears on the highway shes smooth. I did take a video but i don't know if its even worth watching but any info is good info .
Also i,ll add that this clutch is under warranty and i can take it back to have them look at it but don't want them to say that "you need this and that done and will cost extra $" , what could be the problem here.