• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Nagging exhaust leaks

  • Thread starter Thread starter Mustang5L5
  • Start date Start date Jun 9, 2005

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Jun 9, 2005
#1
  • Jun 9, 2005
  • #1
I've been battling an exhaust leak the past few months. Recent roadway construction has caused some component of my exhaust to develop a slight leak. I can hear it plain as day when the engine is under load. It's small but very annoying.

My exhaust is stock except for a cat-back. Twice i have removed and reinstalled the cat-back trying to get rid of the leak. I still have it.

Anyone have any good methods of locating leaks? I have it narrowed down to the passenger side, but i can't tell if it's coming from the rear of the front of the car.

It's getting annoying as hell and i want to fix it!
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 9, 2005
#2
  • Jun 9, 2005
  • #2
Just take it to a muffler shop and have them fix it for you. Shoudn't cost much...
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Jun 9, 2005
#3
  • Jun 9, 2005
  • #3
Kilgore Trout said:
Just take it to a muffler shop and have them fix it for you. Shoudn't cost much...
Click to expand...

Letting someone else fix it is not an option.


Just how I am.
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 9, 2005
#4
  • Jun 9, 2005
  • #4
Yeah, no one ever cares to do as good a job as you do for your own car...

Do you know someone with a lift that you can safely run it on and look/listen for the leak?

Another way might be to seafoam it. When the seafoam burns off it makes loads of smoke that may reveal the location of the leak...
 

blackstalion666

New Member
Mar 31, 2005
177
0
0
New Jersey
Jun 9, 2005
#5
  • Jun 9, 2005
  • #5
get a freind to plug the tail pipes with towels covering there hands. and the pressure you build up will come out were ever the exhaust is leaking from. good luck
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Jun 9, 2005
#6
  • Jun 9, 2005
  • #6
Kilgore Trout said:
Do you know someone with a lift that you can safely run it on and look/listen for the leak?

Another way might be to seafoam it. When the seafoam burns off it makes loads of smoke that may reveal the location of the leak...
Click to expand...

I've been under the car with it running and had someone rev it, but under no load there is no leak. I only hear the leak when the engine is under load...in other words driving or if i slip the clutch out under low rpms's.

I can hear it but i just can't figure out where it's coming from.

I'm curious about this seafoam. Where can i get it?
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 9, 2005
#7
  • Jun 9, 2005
  • #7
AutoZone, Napa...

You can use it three ways:
-add to oil 100 miles before change
-let it be sucked into the intake
-add to gas

Do a search for more info...

I think the towel method sounds like it will work better that was posted.
 

RedBullitt

New Member
Jul 7, 2004
462
0
0
Morgantown WV
Jun 10, 2005
#8
  • Jun 10, 2005
  • #8
just get someone to cover those tail pipes while you are under, or near, and you should hear it at idle even. if not, just have them rev it a bit and you feel around at where the pipes join. Just high temp silicone it if you cant bolt it together to stop it. that red stuff works pretty good for that. what kind of catback?
 

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
Jun 10, 2005
#9
  • Jun 10, 2005
  • #9
where is the leak? is it where mid-pipe connects to catback or where mid pipe connects to manihold?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Jun 10, 2005
#10
  • Jun 10, 2005
  • #10
mity2 said:
where is the leak? is it where mid-pipe connects to catback or where mid pipe connects to manihold?
Click to expand...

Not sure. I've only installed a cat-back, so i can't see the midpipe to manifold bolts loosening up.

It can also be where the tailpipe joins the muffler. I am going to weld those on in a couple weeks, i just want to make sure the leak wasn't elsewhere in case i needed to take it off again
 

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
Jun 10, 2005
#11
  • Jun 10, 2005
  • #11
Mustang5L5 said:
Not sure. I've only installed a cat-back, so i can't see the midpipe to manifold bolts loosening up.

It can also be where the tailpipe joins the muffler. I am going to weld those on in a couple weeks, i just want to make sure the leak wasn't elsewhere in case i needed to take it off again
Click to expand...

well, due to new catback, it could be pulling on the manihold to mid pipe connection. But i would tighen every connection of catback first.try simple thing first, befor take it to shop.
 
You must log in or register to reply here.

Similar threads

A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
613
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
342
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
837
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Engine New Oil Leak Help.
  • Slo5Oh89
  • Mar 14, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
736
Fox 5.0 Mustang Tech Mar 19, 2025
Slo5Oh89
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?