I've recently found out I had a short (My battery would die overnight). After determining it wasn't any of the fused circuits, I put an ammeter between the distrobution block and each individual wire connected to it. One of the wires was drawing 5 amps when the car was off. I disconnected that wire. The car runs fine without it. I want to know if I can leave it disconnected or will I regret it sometime.
The wire is a homemade wire that connects the distrobution block to two (possibly 12 gauge) black OEM looking wires. Those wires go under the battery tray, then I cant trace them from there.
Anybody know what this wire might be? I'm thinking it should narrow it down a fair bit if the car runs good without it.
The wire is a homemade wire that connects the distrobution block to two (possibly 12 gauge) black OEM looking wires. Those wires go under the battery tray, then I cant trace them from there.
Anybody know what this wire might be? I'm thinking it should narrow it down a fair bit if the car runs good without it.