NEED ADVICE ON K-MEMBERS FOR 88 FOX

DNA DOA

Member

Apr 3, 2005

184

0

17

Scappoose

Aug 14, 2006

#1

• Aug 14, 2006

• #1

Over the winter I want to install a k-member under my 88 notch. I removed another 69 lbs. about 4 weeks ago and now I want more.

Who makes a quality k-member? Is it recommended to use tubular a-arms with the purchase of a new k-member and do I have to go with coil overs?

When I do remove the k-member I will not be pulling the motor. So I have seen them in mags, a brace that bolts (?) to the strut tower etc. and holds the motor in the engine bay while you tear the guts out from under it. Does anyone know what this thing is called and where one could get it?

Thanks,
Ben

SEMPER FI

 

gospeedgo

Banned

Aug 14, 2003

978

0

0

Gresham, OR

Aug 14, 2006

#2

• Aug 14, 2006

• #2

http://www.ajeracing.com/mustang.htm

Anthony Jones is very reputable. Maximum motorsports is great as well.

 

DNA DOA

Member

Apr 3, 2005

184

0

17

Scappoose

Aug 14, 2006

#3

• Aug 14, 2006

• #3

Thanks, I have heard of his k-members before. I will look into this.

 

K

killrb

Founding Member

Apr 1, 2002

135

0

0

Stanwood, Washington

Aug 15, 2006

#4

• Aug 15, 2006

• #4

D&D K-members kinda suck. Flimsy and no header clearance. Stay away from those.

My friend bought a PA Racing, PARacing.com and it is an awesome piece. Top quality. Also available in chromoly if you want a few more pounds off of it.

No, you don't have to use tubular arms with aftermarket K-members.

That engine support tool you are talking about can be rented at some automotive paint stores and some Napa locations.

Brandon

 

DNA DOA

Member

Apr 3, 2005

184

0

17

Scappoose

Aug 15, 2006

#5

• Aug 15, 2006

• #5

Thanks for the info on the engine support tool. I will contact napa tomorrow.

Ben

 

gospeedgo

Banned

Aug 14, 2003

978

0

0

Gresham, OR

Aug 16, 2006

#6

• Aug 16, 2006

• #6

Watch out too, some K members will accept factory control arms and some wont. We have done a few Sn's with MM K member and it pushes the wheels out quite a bit. Definately not a totally drop in replacement. I would look at doing it completely- if you cant afford to go coil over then make sure to use a kit that has spring perches on the lowers. Its easier to swallow doing it one time the right way then to keep adding to it.