need donations! (not money)

ironmedic · Dec 14, 2004

hey guys, i was wondering if you guys have any old upper/lower intake manifolds or heads u wanna get rid of for free? im sure some of u guys have some rotting in your garage from a swap! im trying to learn how to port and polish this stuff. i have an old GT-40 style upper/lower intake i am going to start on.

if any of u guys have this stuff u wanna give out, let me know! i have a few 302 parts i can give to you for free in return (if u need it). i have the following old parts:

A/C pump w/ A/C canister
smog pump
stock pulleys
stock H-pipe (cats still on there including pre-cats)
cut up MAC cat back kit (needs to be welded and comes with chrome tips)
stock 89 GT wheels w/ worn out tires
all weather car cover for a fox body (gotta figure out where this went!)
stock headers
stock ignition coil
back seat for a vert (white)
back seat seat belts (red)
stock shifter assembly (T-5)
stock throttle body/EGR spacer

i have other parts that i cannot think of as well. let me know what u need for a trade!

time only · Dec 14, 2004

Have one set of stock upper/lower intake from my old 93's, you are welcome to them. email me for directions.

K.

281pony · Dec 14, 2004

i have an intake in lacey if you want it

ironmedic · Dec 14, 2004

woo hoo! alot of offers popping up

ill try and do one at a time and see how it goes. man my wife is gonna freak if she sees a ton of stang parts in the garage once more LOL!

SMOKEDYA · Dec 16, 2004

ironmedic said:
woo hoo! alot of offers popping up

ill try and do one at a time and see how it goes. man my wife is gonna freak if she sees a ton of stang parts in the garage once more LOL!

just remember 5 words BUT HONEY I LOVE YOU!! good luck in youre quest! peace

john

Darkhorse845 · Dec 16, 2004

gutlessTahoe · Dec 16, 2004

hey Kris, If you get a pretty decent port job done on that GT-40 lower, let me take a look at it and I might buy it unless you are doing it for someone else.

charged9250 · Dec 16, 2004

Check sig... we can work on the price.

ironmedic · Dec 16, 2004

charged9250 said:
Check sig... we can work on the price.

i wouldnt mind buying your heads off you for $40! does it come with everything still attached or no? it doesnt matter to me whats on it or not! hell if the valves are missing, the easier it would be for me to port LOL!

the only problem is that i dont have time to drive down to oregon!

ironmedic · Dec 16, 2004

gutlessTahoe said:
hey Kris, If you get a pretty decent port job done on that GT-40 lower, let me take a look at it and I might buy it unless you are doing it for someone else.

Hey is that you Torry?
i had to throw some JB Weld on a small crack that formed where the thermostat housing bolts up. that is all that is wrong with it. the upper is fine but a small vac pipe broke on it (POS!).
Do you have a GT40 upper to put on this lower? If so, ill hook u up with it for free to test it out and see how good i did. this will take a while though due to my work schedule but ill keep u posted. i am experienced in the military blending jet engine blades so i guess thats a start LOL!

281pony · Dec 16, 2004

sending you a pm iron

charged9250 · Dec 17, 2004

Sent you a PM...

ironmedic said:
i wouldnt mind buying your heads off you for $40! does it come with everything still attached or no? it doesnt matter to me whats on it or not! hell if the valves are missing, the easier it would be for me to port LOL!

the only problem is that i dont have time to drive down to oregon!

gutlessTahoe · Dec 17, 2004

ironmedic said:
Hey is that you Torry?
i had to throw some JB Weld on a small crack that formed where the thermostat housing bolts up. that is all that is wrong with it. the upper is fine but a small vac pipe broke on it (POS!).
Do you have a GT40 upper to put on this lower? If so, ill hook u up with it for free to test it out and see how good i did. this will take a while though due to my work schedule but ill keep u posted. i am experienced in the military blending jet engine blades so i guess thats a start LOL!

Yeah its me, I dont have a GT-40 upper, I was just looking at getting a lower to match up to the KB s/c whenever I get it. Trying to piece things together with what little money I can spare from the wifey.

ironmedic · Dec 20, 2004

hey torry did u ever pick up that intake setup from John? i was about to haul it away with me until he remembered at the last second he was supposed to donate to ya!

gutlessTahoe · Dec 20, 2004

ironmedic said:
hey torry did u ever pick up that intake setup from John? i was about to haul it away with me until he remembered at the last second he was supposed to donate to ya!

Yeah I did, it was a disaster though. I thought he still lived in Centralia so i drove all the way down there, payed for crappy Denny's food, drove up towards his place, but he didnt really know street names so it was hard to find it, but yeah I picked it up. When I get money to send it off, and when it comes back, I will swap them and you can have mine if you are still needing it here in a couple of months. I need to finish my MAF conversion before I can save up the money to send it off. John still needs to find those dang upper and lower hoses from the MAF meter so I can buy those off of him. Dont want to over pay for a couple of small hoses.
If you do a really good job on that GT-40 one, i will still take it off of your hands, I just put that on hold since it will be a long time before I get enough $$ to supercharge. Still need heads and a new tranny.

ironmedic · Dec 20, 2004

gutlessTahoe said:
Yeah I did, it was a disaster though. I thought he still lived in Centralia so i drove all the way down there, payed for crappy Denny's food, drove up towards his place, but he didnt really know street names so it was hard to find it, but yeah I picked it up. When I get money to send it off, and when it comes back, I will swap them and you can have mine if you are still needing it here in a couple of months. I need to finish my MAF conversion before I can save up the money to send it off. John still needs to find those dang upper and lower hoses from the MAF meter so I can buy those off of him. Dont want to over pay for a couple of small hoses.
If you do a really good job on that GT-40 one, i will still take it off of your hands, I just put that on hold since it will be a long time before I get enough $$ to supercharge. Still need heads and a new tranny.

there are no hoses that run on the MAF if i am not mistaken. do u mean the upper intake hoses?

281pony · Dec 20, 2004

he means the mass air inlet tube from the tb to meter.

ironmedic · Dec 20, 2004

oooooooooooh one of those! now i get it! LOL! man u can probably snag one from a junk yard for 50 cents!

gutlessTahoe · Dec 21, 2004

well, I was trying to help out a fellow stanger by purchasing his so he could get a little extra money for the gas he will be using on his break in period, but I dunno if he is really interested

Hey John, just let me know if you find them, who knows, they might show up while your are taking parts out to rebuild your engine again. And I can even come pick them up because now I know where you live and wont have too much troule finding it.

need donations! (not money)

ironmedic

New Member

time only

New Member

281pony

Active Member

ironmedic

New Member

SMOKEDYA

Darkhorse845

Banned

gutlessTahoe

New Member

charged9250

ironmedic

New Member

ironmedic

New Member

281pony

Active Member

charged9250

gutlessTahoe

New Member

ironmedic

New Member

gutlessTahoe

New Member

ironmedic

New Member

281pony

Active Member

ironmedic

New Member

gutlessTahoe

New Member

Similar threads

need donations! (not money)

New Member

New Member

Active Member

New Member

Banned

New Member

New Member

New Member

Active Member

New Member

New Member

New Member

New Member

Active Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency