Need Help!AODE TO T-5 swap

S

stroked95

New Member

Feb 21, 2004

11

0

0

Jun 7, 2004

#1

• Jun 7, 2004

• #1

Ok,I swap out the aode from my 95gt with a T-5 from a 94 V-6 mustang.Every thing bolted up fine but the starter doesn't hit the 5ltr flywheel.So i put the V-6 flywheel in and it hits and starts now.My question is how do i get the 5.0 flywheel to work cause the v-6 clutch isn't holding worth a damn.Please Help Thanks!

 

50Dreamer

Founding Member

Nov 14, 2000

688

17

38

CT

Jun 7, 2004

#2

• Jun 7, 2004

• #2

Why would you put the v6 tranny in?

 

cjman15

Banned

Apr 15, 2004

1,009

0

0

Fairfield, PA

Jun 7, 2004

#3

• Jun 7, 2004

• #3

yeah man, get a V8 T-5

 

S

stroked95

New Member

Feb 21, 2004

11

0

0

Jun 7, 2004

#4

• Jun 7, 2004

• #4

The 94-95 mustangs have the same trans for either V-6 or V-8 only difference is the gear ratio and i like the higher first gear.The fox body are different the have a shorter input shaft.

 

8

87'GTstang

New Member

Feb 16, 2004

1,025

0

0

Jun 7, 2004

#5

• Jun 7, 2004

• #5

Yep, the v6 stang and the T5 still in the v6 stang today (although no longer will the T5 be present for the 05' and on years), is rather close to the one you'd find in the older fox body 5.0-backed stangs.

Have you actually tried a 5 liter clutch, will it not fit, or did you just use the clutch from the donor car?

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,218

17,902

224

Massachusetts

Jun 7, 2004

#6

• Jun 7, 2004

• #6

The V6 t-5 has a slightly lower torque rating. 250 ft-lbs i beleive.

What are the part numbers on the 5.0 flywheel. All i can say is that maybe you do not have the correct flywheel.

 

V

v8only

Active Member

Jul 3, 2003

2,378

22

49

Jun 7, 2004

#7

• Jun 7, 2004

• #7

you need to compensate for the differences in input shaft lengths so that you can run a v8 clutch. i'm not sure exactly how to do this, possibly by getting a different pilot bearing, or maybe by swapping in a v8 input shaft, but once you get that problem taken care of, run a v8 flywheel and clutch

 

50Dreamer

Founding Member

Nov 14, 2000

688

17

38

CT

Jun 25, 2004

#8

• Jun 25, 2004

• #8

Learn something new everyday. What are the diffrences in first gear ratio's?