I have a 95 Mustang I did some MODs on this winter. First I put on an Aeromotive Fuel system. With the new aermotive fuel rails a stock distributor will not work. So I bought a MSD shorty PN8579. MSD said it would work for my application, but I have to buy a new Ignition. So I bought the 6BTM since I have a Supercharger. And I bought a MSD coil and harness for the coil. I got the new distributor and found out the wrong gear was on it. It had an Iron gear which cant be used for a roller cam. So I bought a steel gear from MSD. I got it on and installed everything. Now that everything is on I realized that there is no way for the stock PCM to know what the timing is and the stock PCM has no way to send a single to the injectors to tell them when to pulse. So after all this time, labor and MONEY I still have a car that won't run. ANY SUGGESTIONS PLEASE>>>>>>