Need help with Turn Signal! (car pics inside)
Ok heres the story, I have a 67 mustang Coupe. It's been off the road for about 6 months now. (was in garage for winter) I originally converted it to a Ca. Special Replica. (sorta) So it now has Cougar Lights. Well the way the tail lights are hooked up When I hit my brakes the lights actually Dim (figured because more amp draw) because there meant for only 2 lights originally so I decide to re wire it so the 2 outer lights stay on (running Lights) and the center of both of them light up for brake and flash! (im happy with this for now) I get everything done and my left brake light stops working for noo reason. So we pull all the neat wire job back apart to look for broken wires or short. Find that Im not getting power from the front, After a few mins we realized that the turn signal was messed up and cutting out the brake lights! Tried to adjust some stuff but couldnt ge it to stay Fixed.
Soooo I guess the simple ? is where can I find a complete new turn signal switch with the wires? (we cut it out below the steering column) I tried looking at all the places Like CA mustang, Virginia Mustang, and a few others. None of them actuall show a good picture ofthe part. I dont know what Im exactly missing now cause some things broke. I bought a new cancel switch and it doesnt seem to work correctly. (falls to the left. or down)
The other ? was could I run a seperate Power wire with a 12 volt relay to energize the brakes and add more Juice? I have a extra power wire back there from a old Amp! Thanks for any help!
Heres a Pic of the Lights and Car!
Ok heres the story, I have a 67 mustang Coupe. It's been off the road for about 6 months now. (was in garage for winter) I originally converted it to a Ca. Special Replica. (sorta) So it now has Cougar Lights. Well the way the tail lights are hooked up When I hit my brakes the lights actually Dim (figured because more amp draw) because there meant for only 2 lights originally so I decide to re wire it so the 2 outer lights stay on (running Lights) and the center of both of them light up for brake and flash! (im happy with this for now) I get everything done and my left brake light stops working for noo reason. So we pull all the neat wire job back apart to look for broken wires or short. Find that Im not getting power from the front, After a few mins we realized that the turn signal was messed up and cutting out the brake lights! Tried to adjust some stuff but couldnt ge it to stay Fixed.
Soooo I guess the simple ? is where can I find a complete new turn signal switch with the wires? (we cut it out below the steering column) I tried looking at all the places Like CA mustang, Virginia Mustang, and a few others. None of them actuall show a good picture ofthe part. I dont know what Im exactly missing now cause some things broke. I bought a new cancel switch and it doesnt seem to work correctly. (falls to the left. or down)
The other ? was could I run a seperate Power wire with a 12 volt relay to energize the brakes and add more Juice? I have a extra power wire back there from a old Amp! Thanks for any help!
Heres a Pic of the Lights and Car!