• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

NEED HELP!!!

  • Thread starter Thread starter coppercobra
  • Start date Start date Jul 3, 2008

coppercobra

New Member
Aug 16, 2006
2
0
0
Jul 3, 2008
#1
  • Jul 3, 2008
  • #1
ok, to start off, i put a ford racing crate 302 in my 88 speed density mustang, it ran like crap, found out that i had to put a minium of 30lbhr injectors in it and convert it to mass air (both were recomended by the ford racing tech''s), so i put a 80mm mass air and 36lbhr injectors in it and did the mass air conversion, runs better but not good.

now it stalls randomly when i come to a stop if i let the RPM''s drop too quickly, and when i start it the revs go up and down a few times untill it stalls, unless it rev it out
and it puffs blue when i start it up after it stalls
plus it doesn''t feel like it has anymore power that it did stock and it is supposed to have 350hp out of the box

so i changed the plugs, cap, rotor, wires, PCV Valve(cuz it was lettin oil through into the intake)


has anyone else had these problems, or have an idea of what i should do?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 3, 2008
#2
  • Jul 3, 2008
  • #2
Do you have either a custom chip or an aftermaret MAF to accomodate the 36 LB injectors? If not, then that is part of your problem.

If you do, then see the "Surging Idle Checklist for help with all your idle/stall problems. The first two posts contain all the updates to the fixes. At last count there were 24 possible causes and fixes] for surging idle/stall problems. I continue to update it as more people post fixes or ask questions.
 
You must log in or register to reply here.

Similar threads

J
i need help
  • JK.
  • Oct 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
594
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 28, 2026
JD1964
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
393
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
238
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
B
Help! Fox with idle issues
  • bbarton
  • Sep 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
303
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 12, 2026
AeroCoupe
I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
183
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?