need some cam suggestions

superdavestrate · Nov 6, 2009

whats max lift cam that works and sounds good in stock motor. Checking on heads,intake to add power,whatcha think?

Celeb · Nov 6, 2009

superdavestrate said:
whats max lift cam that works and sounds good in stock motor. Checking on heads,intake to add power,whatcha think?

Can you give us some more info on what you're trying to do? Are you asking about what would be a good heads/cam/intake combo? Max lift on a stock motor will yield you nothing more than a choppy idle and probably horrendous driveability.

liljoe07 · Nov 6, 2009

About .520 and the Stock steal rockers are too close to being out of travel.

Im going by the OP saying "STOCK MOTOR" I take that as being 100% stock.

Brandon11010 · Nov 6, 2009

Well me personally, with a .30 bore, stock rods, forged pistons, 1970 factory 351w heads with 1.94 1.61 ported exhaust, b303 cam made 344hp 360 tq at the crank and 276tq 300tq at the wheels.. nice little lope to it

superdavestrate · Nov 7, 2009

more specifics

yeah should have been more specific,it was a cam answer I was looking for ,on the other hand I'm sure gt-40 heads and intake are my best bet,don't know specifics on 351w heads what do you have to modify if anything for those I know it's probably not worth just adding a cam but if I did might need to stay in 480 lift range motor is 93 stock long block w/shorty headers 2.5 flows w/ cross over pipe 410's in rear t-5,ignition upgrade,and heavy foot,just burnt out on stock sound

need some cam suggestions

superdavestrate

Member

Celeb

liljoe07

Brandon11010

New Member

superdavestrate

Member

Similar threads

need some cam suggestions

superdavestrate

Member

Celeb

liljoe07

Brandon11010

New Member

superdavestrate

Member

Similar threads

Privacy & Transparency

Privacy & Transparency