Hey guys, I recently rewired the car and was able t make it run... The only thing i didn't replace were the wires going from the voltage regulator to the alternator. So today I did just that... problem is I kinda didn't keep a very good system of the wires going where. So I need your help...
When I look at the back of the alternator all i can find is the one terminal that has batt next to it... I don't know the other ones... My alternator has like 6 terminals in the back but originally only 3 were used. One was connected to the ground on the engine block.
One more thing to add. There was a black and yellow wire and a yellow wire that came together to one terminal that hooked up to the starter relay... i had put electrical tape over that and the car had started... so this time i just took it out all together...
When I look at the back of the alternator all i can find is the one terminal that has batt next to it... I don't know the other ones... My alternator has like 6 terminals in the back but originally only 3 were used. One was connected to the ground on the engine block.
One more thing to add. There was a black and yellow wire and a yellow wire that came together to one terminal that hooked up to the starter relay... i had put electrical tape over that and the car had started... so this time i just took it out all together...