Need to borrow some throttlebodies

sage2k · May 4, 2007

Ok im doing a trickflow HCI setup with 75mm throttlebody, 24lb injectors, stock maf, longtubes, cai, tweecer RT, 373 gears...anyways

I see alot of threads on people comparing throttlebody sizes
I am willing to go to a dyno, and dyno with my stock tbody, 75mm tbody, and any other size tbody someone is willing to let me borrow.
ill ship it back after im done with it
I have good ebay and heatware feedback if you want to see it
I am installing the setup hopefully mid may, and would be willing to hit the dyno sometime in June
anybody willing? :SNSign:

Stanger007 · May 4, 2007

sage2k said:
Ok im doing a trickflow HCI setup with 75mm throttlebody, 24lb injectors, stock maf, longtubes, cai, tweecer RT, 373 gears...anyways

I see alot of threads on people comparing throttlebody sizes
I am willing to go to a dyno, and dyno with my stock tbody, 75mm tbody, and any other size tbody someone is willing to let me borrow.
ill ship it back after im done with it
I have good ebay and heatware feedback if you want to see it
I am installing the setup hopefully mid may, and would be willing to hit the dyno sometime in June
anybody willing? :SNSign:

Dude, I told you to get me a throttlebody for my car but this is not the way to do it... not cool.

Nah just kidding - Sam is a great friend and I'll vouch for him as well. This is a very worthwhile experiment, props to him for thinking of it!

Wes

The Green GT · May 4, 2007

Ill also vouch for him and if need be, take him out for a small fee.

gcomfx.com · May 4, 2007

I have a BBK 65mm but I'll be using it. If you would have caught me a month ago I would have sent it.

Very interested in seeing your results.

Stanger007 · May 4, 2007

The Green GT said:
and if need be, take him out for a small fee.

Girls over in your end of the state are hard to come by, eh?

gcomfx.com · May 4, 2007

The Green GT · May 4, 2007

Stanger007 said:
Girls over in your end of the state are hard to come by, eh?

Nah, I just really want someone to come to Mr. Gattis with me so we can combine our tickets.

EDIT: And most of the girls here suck at skiball.

plus they are mostly s.

sage2k · May 4, 2007

you'd have to pay me good to eat at Mr. Gattis, their pizza sucks

back to the original topic

5spd GT · May 4, 2007

I had this idea when I made one of the threads a month or so back (long)...but I just don't have the money to do the test. I think I could get some parts local enough to do it, just no money!

I hope you are able to do it, and I trust you, just by the sheer effort alone.

If possible, try to get all of the same brand possibly? Like BBK 65/70/75 or Accufab 65/70/75. The latter preferabbly, they flow a bit better in general.

Keep the car on the dyno (same strap), try to keep around the same coolant temps (engine temps), and go from smallest to largest

Again, great idea!

sage2k · May 5, 2007

5spd GT said:
If possible, try to get all of the same brand possibly? Like BBK 65/70/75 or Accufab 65/70/75. The latter preferabbly, they flow a bit better in general.

Keep the car on the dyno (same strap), try to keep around the same coolant temps (engine temps), and go from smallest to largest

Thanks for the suggestions, I'll try my best to make the test as consistent as possible. My 75mm is a BBK

Grn92LX · May 5, 2007

I might send you my accufab 75mm if you send me back a (much needed) accufab 75mm race tb (90mm opening)

Bosko5.0 · May 5, 2007

I would send you a BBK 75mm, but you gots one.

5spd GT · May 6, 2007

The intake opening a couple inches in, is much smaller than where the throttle body bolts on to the intake. It necks down for velocity. The opening isn't going to help when it still necks down to 75mm TB. That is what is called a 'waste of money'...

MysteryMachine · May 6, 2007

The Green GT said:
Nah, I just really want someone to come to Mr. Gattis with me so we can combine our tickets.

EDIT: And most of the girls here suck at skiball.

plus they are mostly s.

In that case take a and lean her over the skiball table and throw your balls. i don't see a problem there at all

sage2k · May 8, 2007

The Green GT · May 8, 2007

I have the perfice picture to post right now, but I would probably get banned. lol

sage2k · May 8, 2007

haha do it

Wes was thinkin he might buy a 70mm tbody
eric you should get a 65mm, then let me test them all

The Green GT · May 8, 2007

It would definately be filed under the "****" category. which Im pretty sure would not fly lol.

Basically, anal, and balls getting sucked in the ass.

Yea, its pretty bad.

Its a .gif btw.

sage2k · May 8, 2007

lol i have seen that pic before

The Green GT · May 8, 2007

sage2k said:
lol i have seen that pic before

The one with the black guy? lol

Im pretty sure Id get banned quick. lol

Need to borrow some throttlebodies

sage2k

Member

Stanger007

The Green GT

No 13 year olds are safe around me.

gcomfx.com

Stanger007

gcomfx.com

The Green GT

No 13 year olds are safe around me.

sage2k

Member

5spd GT

"the 5.0 owns all"

sage2k

Member

Grn92LX

Fidanza Man!

Bosko5.0

Active Member

5spd GT

"the 5.0 owns all"

MysteryMachine

Active Member

sage2k

Member

The Green GT

No 13 year olds are safe around me.

sage2k

Member

The Green GT

No 13 year olds are safe around me.

sage2k

Member

The Green GT

No 13 year olds are safe around me.

Similar threads

Need to borrow some throttlebodies

Member

No 13 year olds are safe around me.

No 13 year olds are safe around me.

Member

"the 5.0 owns all"

Member

Fidanza Man!

Active Member

"the 5.0 owns all"

Active Member

Member

No 13 year olds are safe around me.

Member

No 13 year olds are safe around me.

Member

No 13 year olds are safe around me.

Similar threads

Privacy & Transparency

Privacy & Transparency