that sounds kinda slow for you mods...but it IS a 94-95. I know a guy who runs 8.50 1/8th with a stock 5.0, CAI, B-Cam, OR H and flows dumped, a tremec tranny, 3.55's, alumn. d/s and tri-ax. But it is a fox...
Well, I will tell you my experience and you can go from there. I NEVER ran in the 13's with anything higher than 8.999 in the 1/8th. If I ran a 9.000 it was a 14.0, if I ran a 8.999 it was a 13.9. I think you are REALLY close, but I think you are just a few hundreths shy.
yeah that seems a little off with your mods........i run consistent 9.12-9.15@78.xxmph with h-pipe,pulleys,CAI, and a 3.55 gear with the same 60ft on a 165,000 mile motor.....track location might be the difference though
Thanks for the replys guys, I think I'm going to go with tmoss lower intake with maybe a bit of work done to the upper as well and after that a decent set of heads...