• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

New guy with question

  • Thread starter Thread starter interceptor7
  • Start date Start date Aug 17, 2006
I

interceptor7

Member
Aug 11, 2006
59
0
7
Aug 17, 2006
#1
  • Aug 17, 2006
  • #1
Hi everyone.
Been lurking this very informative forum for a while. Now I have a question:
Anyone know how to remove the front struts in a 93 GT without the special slotted-socket tool?

If not, anyone know where I can find/buy that @#$%ing tool? The only source I found online was out of stock until September (Toolsource, IIRC)!

Thanks for reading!
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Aug 17, 2006
#2
  • Aug 17, 2006
  • #2
have you checked with your local autoparts stores like autozone they loan tools with a refundable deposit.i would call them and see if the have the tool your needing on the loaner program....
 

Henceforward

The Avatar Master
Founding Member
Jul 17, 2001
485
0
0
Aug 17, 2006
#3
  • Aug 17, 2006
  • #3
If the front struts are anything like the 92 then you can use an impact gun with the proper socket.

It took me a while, and I had to slightly bend the dust shield back, but I installed my KYB struts that way.
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Aug 17, 2006
#4
  • Aug 17, 2006
  • #4
If you don't have an impact, just drive up to your favority repair shop, and have a tech loosen the strut bolts for you, then drive home and take them off by hand.
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Aug 17, 2006
#5
  • Aug 17, 2006
  • #5
Typically you can remove the upper strut nut with an impact and not have to hold it. Or a box wrench and a hammer. May need vice grips with the hammer....

Done it both ways. Impact preferred....
 
I

interceptor7

Member
Aug 11, 2006
59
0
7
Aug 17, 2006
#6
  • Aug 17, 2006
  • #6
Well, I have an impact gun but it's very low torque (came free with the compressor). I also tried my favorite junkyard weapon: the manual impact screwdriver, but there's not enough space with the hood propped open to swing the hammer. I tried jamming the tip of a (admittedly cheap) pry bar sideways in the slot, but it snapped off.

Next, I plan on trying again with the impact screwdriver (socket attached BTW) with the hood off so I can actually swing the hammer.

My point now is, why is it next to impossible to find the freaking tool? It's nothing but a round socket with a flat screwdriver-like blade inside, and it costs about $12 in Toolsource (they just don't have it in stock).
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 17, 2006
#7
  • Aug 17, 2006
  • #7
Jrichker and I replied to your other thread too.

Good luck.
 
I

interceptor7

Member
Aug 11, 2006
59
0
7
Aug 17, 2006
#8
  • Aug 17, 2006
  • #8
HISSIN50 said:
Jrichker and I replied to your other thread too.

Good luck.
Click to expand...
Thanks for the replies. I couldn't find this thread so I started a new one. Sorry!
 
You must log in or register to reply here.

Similar threads

Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
504
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
475
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
1999 Mustang GT - No Start- Need help understanding the fuel pump circuit and how it works
  • 99gtGuy
  • Nov 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
655
1996 - 2004 SN95 Mustang -General/Talk- Nov 7, 2025
04newedge-
0
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
607
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?