• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

new stang owner.

  • Thread starter Thread starter ocbaud
  • Start date Start date May 12, 2005

ocbaud

Member
May 7, 2005
239
1
18
Midwest City, Oklahoma
May 12, 2005
#1
  • May 12, 2005
  • #1
i currently drive a 400+hp 86' chevy truck and just cant keep it as a daily driver. i'm looking at selling it and buying a 99-04 gt 5 speed. the first thing i want to do for it is buy a new shifter. I've never drove one with an aftermarket shifter, so i'm not biased anyway.

what are the pros and cons of all the popular shifters. Pro 5.0, tri ax, mgw??

i was planning on getting the pro5.0 with the new longer handle, but then i've been reading about all the people buying the mgw and they love it. so i was thinking about it with the red handle.

after that i'll be looking at exhaust. I love the magnaflows on my truck and would like to get a cat back made my magnaflow, i would also like a 50 state legal X pipe too. I live in oklahoma where we dont have inspections, but i would rather stay federal legal with a new car. I have an H pipe on my truck, but i would really like the extra performance of the xpipe on the stang. any suggestions on different cat backs and mid pipes?

also, i'm wanting to lower the car too. i know nothing about car suspension because the only thing i've lowered was my truck with new springs and spindles. i was thinking about 1.25-1.50" all around. i dont know what brands to look at and all which to avoid.

haha i guess thats it for now.
 
R

Roger_4.6_96

Founding Member
Jul 16, 2002
1,209
0
0
Reno,NV
May 12, 2005
#2
  • May 12, 2005
  • #2
Installing a shifter is hella easy. I hear good things about all the shifters.
 

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,
Apr 22, 2003
843
0
0
VA Beach
May 12, 2005
#3
  • May 12, 2005
  • #3
what the specs is on your truck?
 

ocbaud

Member
May 7, 2005
239
1
18
Midwest City, Oklahoma
May 12, 2005
#4
  • May 12, 2005
  • #4
97v6Silver said:
what the specs is on your truck?
Click to expand...

355 sbc
10:1compression
Holley SystemaxII kit
(Holley aluminum heads, Lunati cam(235/240@.050 - .490" lift))
Full MSD ignition
Probillet distributor, 6al box, blaster2 coil
Lowered 4.5"/6" with DJM & Western Chassis Components
edelbrock 650cfm avs carb
3.73 gears and Eaton Posi unit
17" American Racing Torque Thrust II's with 255/50/17's all around

 

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,
Apr 22, 2003
843
0
0
VA Beach
May 12, 2005
#5
  • May 12, 2005
  • #5
i got a red 82 silverado i'm looking to swap in some power, how much did it cost you?
 

ocbaud

Member
May 7, 2005
239
1
18
Midwest City, Oklahoma
May 12, 2005
#6
  • May 12, 2005
  • #6
97v6Silver said:
i got a red 82 silverado i'm looking to swap in some power, how much did it cost you?
Click to expand...
the truck i got a for my 16th birthday, 4 years ago. the engine i have a little over $5000 in, the rearend has about $700 in parts and install, the tranny is about to be rebuilt again, since i blew the torque conveter recently and all that
 
P

productj1

New Member
Apr 3, 2004
42
0
0
May 12, 2005
#7
  • May 12, 2005
  • #7
i've got a b&m shifter and am very happy with it. I think it will basically be what you like. They are all probably pretty good
 
F

FalconGuy016

New Member
Oct 26, 2004
437
1
0
Northern VA
May 12, 2005
#8
  • May 12, 2005
  • #8
Anybody with an MGW will tell you to buy one.

No matter WHAT shifter they used to own!

I have not heard one single bad thing, ever, about the MGW. I have one, in fact After two weeks, I think its one of the most important mods to do to your mustang first!
 

Blinkstang

Member
Apr 2, 2005
316
0
16
Chicago, IL
May 12, 2005
#9
  • May 12, 2005
  • #9
Hey, I am a noob myself, but noticed no one else has answered your question yet, so:

For shifter, MGW seems to be whats hot right now, and is what I plan on getting myself. It has a new adjustable design where the shifter sits straight up and allows you to rotate the handle to where you like. Also suppose to be very quiet, with no noise (like stock). Also, throws are the shortest advertised. Anyway, it seems like a great piece of equipment!

For the catback, Magnaflow has 2 options with their traditional Magnaflow set and their Magnapacks, for a more aggressive sound. I am ordering the Maganpacks as soon as I get the cash! For pipe, I have seen a lot of people say go H with the Packs for best sound. But thats up to you, plenty of X's out there to choose from. I personally like the MAC Prochamber. Depends on your taste, may not be for you, but I have heard it coupled with the Packs and it sounds great, but again thats my opinion!

For springs, the Eibach pro kit advertises a 1.5' drop all around, and is a good set to go with. I personally went with the H&R Sports and couldn't be happier. Drops the rear 1.5' and the front 1.6', for the sweet raked look. I also picked up a set of Tokico HP (blues) Shocks/Struts and some Maximum Motorsport 4-bolt Caster Camber Plates. I love the set-up and have had it over a month now with no problems. The ride is compared to stock and doesn't ride rough like I was scarred might happen. Like I said I couldnt be happier and definitely reccommend the setup. The drop is good enough where I dont scrape when coming out of parking lots (by taking it slow), and takes away the 4x4 monster truck look. If you want a smaller drop, Ford makes springs as well that you can look into that drop the car somewhere over an inch I believe, they have different sets (C and B springs). Not sure which ones do what.

Hope this helps, just thought I'd relate my experience with some of these products and pass along the information. I have a 2002 GT, 5-speed by the way. If you need any pics of the drop just let me know! Good luck and Im sure some of the other users on here can provide input as well.
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
May 12, 2005
#10
  • May 12, 2005
  • #10
Damn, if I saw that truck on the street I would so try to race it.... and get beat

Anyway, go down to the Ford parts counter and get the Ford Racing catalog fo $5. It has lots of cool stuff.

Or, if you can't wait, check out www.fordracingparts.com or www.fordparts.com.
 

Ghostface

Member
Jan 11, 2004
226
0
17
May 12, 2005
#11
  • May 12, 2005
  • #11
From what i've read, no x-pipes are legal in CA. If you plan on getting a Magnaflow catback might as well get their X also, they compliment each other nicely. Power and sound.
 
You must log in or register to reply here.

Similar threads

S
New guy- first Stang- I love it !!
  • smid333
  • Mar 22, 2026
  • The Welcome Wagon
Replies
5
Views
159
The Welcome Wagon Mar 23, 2026
smid333
S
C
New mustang owner
  • CPH89LX
  • Apr 26, 2026
  • The Welcome Wagon
Replies
3
Views
122
The Welcome Wagon Apr 27, 2026
91AOD5.0LX
B
Airaid reduction sleeve?
  • BriansNSane
  • Dec 20, 2025
  • SN95 4.6L Mustang Tech
Replies
0
Views
143
SN95 4.6L Mustang Tech Dec 20, 2025
BriansNSane
B
What's it Worth? 2000 GT
  • Mustang5L5
  • May 8, 2026
  • What is it Worth?!?!?
Replies
6
Views
284
What is it Worth?!?!? Jun 13, 2026
KRUISR
R
New Member from Poland
  • Restomotive
  • Apr 22, 2026
  • The Welcome Wagon
Replies
3
Views
92
The Welcome Wagon Apr 22, 2026
91AOD5.0LX
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?