Final numbers came out to be 229.5 rwhp, 249.9 rwtq. This was @ 7psi, btw. Thats a jump of 40 rwhp and 25 rwtq over the original tune in the chip when I was running so rich, so for now I am pretty pleased. Jim D. said since it was detonation free we could add a couple more degrees of timing and see a bit more hp, but I need to go back next week and get a little problem tweeked out. Its obvious on the graph that at 5K something is cutting the power. Jim said that after talking to someone @ SCT that it appears to be some kind of secondary rev limiter or something that needs to be worked out. As it stands, it looks like it wants to pull a little more to maybe ~240 or so if we can get that fixed.
Other than that, I think I am pretty much in the ballpark of what this setup should do. I do think the trq curve looks pretty nice for a cent blower. Oh, and the red numbers are just for comparison sake when I had just the pulley, cai and duals.
What do you guys think? Does it look like its where it should be (aside from the dip @ 5K)?
http://home.comcast.net/~cvc1818/wsb/html/view.cgi-photo.html--SiteID-1736088.html
Other than that, I think I am pretty much in the ballpark of what this setup should do. I do think the trq curve looks pretty nice for a cent blower. Oh, and the red numbers are just for comparison sake when I had just the pulley, cai and duals.
What do you guys think? Does it look like its where it should be (aside from the dip @ 5K)?
http://home.comcast.net/~cvc1818/wsb/html/view.cgi-photo.html--SiteID-1736088.html