fasttback said:Mustangs Plus sells a couple.
http://www.mustangsplus.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=MPFMP&Category_Code=Dash
Chris H said:What did you end up spending? Looks like Mustang plus is over $480 and about $800 from the other site!! I guess its just what they cost
I never bought one. Stuck with the original style, but I will dump money into a classic tach that matches the interior.
natedizzle said:I just bought one of these gauge clusters from Haneline with 6 white face gauges. It should get here in a couple of days. They look to be almost exactly the same thing that Mustangs Plus sells, but a little less expensive.
http://haneline.com/mustang64_6.html
I did buy the optional wiring harness for the gauges, which was 70 more dollars.
I made mine out of about $15 worth of sheetmetal and round stock.
I tried to send pics but they keep coming back "too large".
Took a piece of 1/8" x 2" flat stock and bent it around the inside of the stock dash bezel opening. Just hand formed it until it fit. Butt welded the ends together. That gave me the basic shape. Didn't want just the 1/8" edge so I took a peice of round stock and bent it around the edge and tack welded it in place.
The piece with six holes in it is just 1/8" flat stock. Traced around the outside of the new bezel and trimmed until it fit.
About two nights worth of work and alot cheaper.
I will send the pics to anyone who can post them here.
Best regards
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?