Next round of modificaitons...

rygenstormlocke

former 10 second badass

Aug 13, 2005

698

0

0

Northern Virginia

Sep 9, 2006

#1

• Sep 9, 2006

• #1

Well, just got back from PowerHouse!!!! I must say, they are a great shop, never recommend something you don’t need, very helpful, answer your questions. And hanging out with Nav (another 4.0 owner) was cool too, unfortunately we didn’t have enough time to close the bar. Oh well…next time….


Anyway, thought I would post the list of modifications for this visit to PH, as follows:


· Precision Industries Torque Converter @ 3400RPM
· AEM Wideband install
· PowerHouse driveshaft w/safety loop
· K-Member Brace w/Engine TQ Limiters
· PH Panhard Bar
· TA Girdle

That’s it, oh, almost forgot….

· 11PSI Spring install!!!!
· Dyno tune for 11PSI

It’s time to get serious here, 4.0L SC’s going built motors, people hitting kick ass times on street tires…..so be it. The arms race continues……

….and don’t worry, I’m not beyond a built motor either….LOL, I may just have to look into that…or maybe I have already…..

I pick up the car next Saturday, and plan to hit Thompson Dragway the same day to see how she does.

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

Sep 10, 2006

#2

• Sep 10, 2006

• #2

man, you are going all out!!! post pics when you get it back, as well as the 11 sec time slips!!!

 

rygenstormlocke

former 10 second badass

Aug 13, 2005

698

0

0

Northern Virginia

Sep 10, 2006

#3

• Sep 10, 2006

• #3

LOL. Thanks man, and will do!

I think 11's may be a stretch without drag shocks and some weight reduction. I'm not ready to do drag shocks on my daily driver, I need to call Scrming up and ask him how his long distance drives are on the drag shocks. I will also need to do the front BMR sway bar delete kit, and lighter rims. I think it's doable, but got some more to do to pull it off in an auto.

I do think low 12's are possible with this setup.

 

Jenns01TA

Active Member

Mar 31, 2005

37

0

36

Sep 10, 2006

#4

• Sep 10, 2006

• #4

Rygen,

Your unrelenting quest for an optimal V-6 bracket racer/DD amazes me. You have my continued appreciation and unwavering respect.

 

rygenstormlocke

former 10 second badass

Aug 13, 2005

698

0

0

Northern Virginia

Sep 10, 2006

#5

• Sep 10, 2006

• #5

Jenns05Stang said:

Rygen,

Your unrelenting quest for an optimal V-6 bracket racer/DD amazes me. You have my continued appreciation and unwavering respect.

Click to expand...

Wow, thank you Jennifer, comming from you that means a lot. I can't help it, I'm addicted to this. Luckily, I have an understanding family CFO...er wife. LOL.

The CFO even approved the purchase of the Boss when it comes out.

 

Jenns01TA

Active Member

Mar 31, 2005

37

0

36

Sep 10, 2006

#6

• Sep 10, 2006

• #6

rygenstormlocke said:

Wow, thank you Jennifer, comming from you that means a lot. I can't help it, I'm addicted to this. Luckily, I have an understanding family CFO...er wife. LOL.

The CFO even approved the purchase of the Boss when it comes out.

Click to expand...

ahhhhh Well then my modification addicted friend you have a Chief Financial Officer who understands the delicate balance between planning for the future and living for the day! She's a keeper!

 

T

The Fang

Member

Sep 11, 2005

602

0

16

Tallahassee Fl

Sep 10, 2006

#7

• Sep 10, 2006

• #7

Damn my wife make more money than me butt I know I couldnt talk her into a Boss.
Ur one lucky dude!

 

Hoodlum

New Member

Aug 14, 2006

16

0

0

Augusta, GA

Sep 11, 2006

#8

• Sep 11, 2006

• #8

Hows the driveshaft working out? I'm interested if its just a bolt in setup(shop of course) or do they have to modify it for the 6?

 

rygenstormlocke

former 10 second badass

Aug 13, 2005

698

0

0

Northern Virginia

Sep 11, 2006

#9

• Sep 11, 2006

• #9

Wont have a full report until this Saturday, when I pick the car back up.

 

C

Cactuar

New Member

Sep 11, 2006

13

0

0

Sep 13, 2006

#10

• Sep 13, 2006

• #10

Powerhouse is located about 25 miles from the town I grew up in. They do good work.

 

Lsredy2kstang

Look, I'm special, dammit

Nov 29, 1999

2,543

5

0

Woodstcock, Georgia

Sep 13, 2006

#11

• Sep 13, 2006

• #11

Good luck, I am fixing to break intot he 13's with my lil ol 2000 Stang.

I am waiting on the FedEx truck for the DR are on it.

Hurry up truck...

 

rygenstormlocke

former 10 second badass

Aug 13, 2005

698

0

0

Northern Virginia

Sep 13, 2006

#12

• Sep 13, 2006

• #12

Got an update

Well, got an update on the work. Looks like Percision has to modify my stall to fit the V6, so its two months out. It's unfortunate as this will probably put me past race season. But its the first one, so I don't mind.

However, not all is lost. Percision is reworking my stock stall and adding 200-300 RPM (so hoping I can launch at 2800rpm, we will see) to it so I can at least improve my launches this season. So I'm very excited about that.

Also, for the TA Girdle, its been discussed before but wanted to remind people that you need a panhard relocation bracket in order to clear the 7.5 rearend. I only know 2-3 owners that have one and they had to have one. I'm going with the PH/CHE piece on this, but BMR also makes the bracket.

I'm hitting Thompson this saturday, but I'm not holding my breath, because that track is 1500 and the track I usually go to, Mason Dixon in MD is at 600ft above sea level. So I think my best times this season will be down there in the weeks to follow.

As soon as I get the drive shaft in, and other goodies I will provide a full report.

Racethis (handle of another 4.0L owner) thinks I should look into drag shocks. So I am now really thinking hard on those to.

 

rygenstormlocke

former 10 second badass

Aug 13, 2005

698

0

0

Northern Virginia

Sep 13, 2006

#13

• Sep 13, 2006

• #13

Also, since we are on the subject....

You can get a stall from TCI or Percision, but everyone I talked to swears by Percision. They are stronger, and can be custom configured/built to your car. For the Percisiion piece, they needed my dyno data to build it.

You can also have your stock one reworked if you only want a few hundred RPM.