Nitrous Express Nitrous Kit Installed- I have a How-to also...

[BuffMUSTANG]

Well, after a lot of work from a couple friends and I, I have the Nitrous Express kit installed on my 01 GT now. I went and tested it out and what a difference the 100 shot makes.... Puts me back in my seat like never before for sure. I have about 30 pictures of everything we did and we wrote up a "how-to" for our selves since there is not very much on how to install everything. I have the NX Kit that is adjustable from 35-150 HP PN: 20922.....
I also have the GenX-2 Upgrade kit. I also have a MSD Window switch PN:8956 that I sent back to MSD to have them convert it for a 1 cylinder application for our distributor-less cars. I'm working on the how-to right now. If Anyone wants pictures or the How-to let me know. Thanks... Justin.

 

[4.6modular]

Sounds good. Glad you like the NX kit. You're doing better then me, I've had my kit for over 3 months now which is practically the same kit you have and I still don't have my kit hooked up yet. The wiring is the only thing that I have left. I tried the wiring several different ways and came up losing. I'm not wire savey. Damnit!!!!!!!!! I'll PM you so you can send me some pics and how toos via e-mail.

 

[inferno9898]

maybe you could try and get the how-to posted on stangnet articles....make it a resource for everyone

 

[02mingreyGT]

Oh YESSS this is perfect for me because im in the process of ordering ALL of this stuff soon. PLEASE send me all of your write up. I love you :worship:

 

[BuffMUSTANG]

Did everyone that gave me their E-Mail address get the "How-To" doc.? If so were you able to open it? What did you think? Should i change anything or was i wrong about anything?

 

[GoBabyVroommm]

Niiceee!!! I'm getting that NX kit off my friend that is on his ws6. Is your kit the wet one? Post some pics if you can. I have a 99 4v cobra you think the hook up would be the same as if it was a 2v?

 

[02mingreyGT]

I didnt get the email???? I want it BADDD hehe

 

[Trick98GT]

Does anyone know the numbers of the drill sizes on the jets for the different HP shots?
50?
75?
I also have NX kit, but all the jets I got are all mixed up. The guy i bought them from didn't know right from left. But i got the kit for 200 bucks with purge so i didn't complain...

 

[BuffMUSTANG]

http://www.nitrousexpress.com/Instructions/main.htm Go here and then look for the "Jetting" section and click on the Ford EFI link. It will show you all of the NX jet sizes and what shot they are for.

 

[BuffMUSTANG]

I'm not positive, but i dont see why it wouldnt work. it's still going into the intake....

 

[black02gt-t]

hey send that install to me [email protected]