I had swapped my gauges out and when I got it all back together everything worked except my headlights highbeams indicators all good. Looked it up here on the forums and saw where Hissin50 had said to check the red and yellow wire at the mf switch. And it was in fact backed off. Put it back on and it all works great. I think what happens is when you pull on the headlight switch plug it pulls on that red and yellow wire at the mf switch. Any way just wanted to put the problem and solution on here for others to find, since it seems to be a common deal. And to thank HISSIN50 for helping me yet again. I get all kinds of held directly and indirectly.