• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

no throaty sound with new 40 series flows

  • Thread starter Thread starter leveling
  • Start date Start date Oct 12, 2005
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
Next
First Prev 4 of 5 Next Last
G

GNN60GT500

Founding Member
Jun 18, 2002
1,218
26
48
51
5 car lengths in front of you!
www.magnaflow.com
Oct 18, 2005
#61
  • Oct 18, 2005
  • #61
OK this is it- Im going to jump in here and answer the question-

This is based on cutting open old FLowmaster mufflers that have been on different vehicles-

They DO get louder because they rust- some will rust faster then others depending on condensation, which can vary depending on how often the car is driven, and climate-


A muffler shop owner I know has cut them open because he was also curious, and this is what he found- according to him, the first thing to go on a Flowmaster will be the baffle inside coming loose from rust-

Not all Flowmasters are going to do this, but this is just based on his experience-

Hope this answers everyones questions-
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,357
209
114
Ohio
Oct 18, 2005
#62
  • Oct 18, 2005
  • #62
GNN60GT500 said:
OK this is it- Im going to jump in here and answer the question-

This is based on cutting open old FLowmaster mufflers that have been on different vehicles-

They DO get louder because they rust- some will rust faster then others depending on condensation, which can vary depending on how often the car is driven, and climate-


A muffler shop owner I know has cut them open because he was also curious, and this is what he found- according to him, the first thing to go on a Flowmaster will be the baffle inside coming loose from rust-

Not all Flowmasters are going to do this, but this is just based on his experience-

Hope this answers everyones questions-
Click to expand...

Wow, most of theses Guys notice this magical change in only 1 month and you are trying to pass off that they rust out in that period of time? If there is some water in there, the heat should be sufficient to dry it up, unless all you do is make very short trips. That was my argument anyways, the muffler would have to be physically altered to change the sound, such as rust in order to change the sound.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,357
209
114
Ohio
Oct 18, 2005
#63
  • Oct 18, 2005
  • #63
CoupedUp said:
Straight from the source huh
Are these the same guys that designed the cat-backs with too small of a ball-socket flare on the kits.

"Tech department"


They get louder, period.
Click to expand...

The Ball and Socket matched up with my Bassani X Pipe with no problem, and my sound sure hasnt changed over the last 5 years. You have given no Technical facts that can back up your Theory.
 
F

fiveohGT

New Member
Jun 22, 2004
353
1
0
Fairfax Virginia
www.stev0inc.com
Oct 18, 2005
#64
  • Oct 18, 2005
  • #64
89lxsport50 said:
When you roll the windows down they get louder.
Click to expand...

the mystery is solved
 

huRACEmentPSR

Banned
Apr 2, 2005
101
0
0
39
San Jose, CA
Oct 18, 2005
#65
  • Oct 18, 2005
  • #65
maybe someone can help me with my mystery. i have bbk shortys, an offroad h, and 40 series with turndowns. i got the mufflers from a friend used, and they had been on a car, so they are definitely "broken in" if there is such a thing. my motor is definitely not stock, however the mods are unknown, and my car pulls 290hp to the wheels. my exhaust is 2 1/2," but the mufflers have a 2 1/4" turndown (if that makes a difference). not only are the flows quieter than the dynomax superturbos i had on before, but my car is QUIETER than my buddys 95 cobra, which has bassani shortys, aftermarket catted h-pipe, and 40s without turndowns. the cobra has no major mods. we came to the conclusion that maybe his bbk fenderwell intake does it? im still running the stock airbox with a k&n drop in. anyone know what gives?
 

Dean85GT

New Member
Nov 27, 2004
502
1
0
Thorold, Ontario, Canada
Oct 18, 2005
#66
  • Oct 18, 2005
  • #66
huRACEmentPSR said:
maybe someone can help me with my mystery. i have bbk shortys, an offroad h, and 40 series with turndowns. i got the mufflers from a friend used, and they had been on a car, so they are definitely "broken in" if there is such a thing. my motor is definitely not stock, however the mods are unknown, and my car pulls 290hp to the wheels. my exhaust is 2 1/2," but the mufflers have a 2 1/4" turndown (if that makes a difference). not only are the flows quieter than the dynomax superturbos i had on before, but my car is QUIETER than my buddys 95 cobra, which has bassani shortys, aftermarket catted h-pipe, and 40s without turndowns. the cobra has no major mods. we came to the conclusion that maybe his bbk fenderwell intake does it? im still running the stock airbox with a k&n drop in. anyone know what gives?
Click to expand...

Maybe one car has just more general "engine noise" coming from it than the other. Its really hard to compare two seperate cars with similar mods because they always seem to have their own sound....
 

huRACEmentPSR

Banned
Apr 2, 2005
101
0
0
39
San Jose, CA
Oct 18, 2005
#67
  • Oct 18, 2005
  • #67
yeah, two motors never sound the same, but its just wierd that my catless exhaust is quieter than my buddys catted. is my car special or something? i have been told from the start that o/r h with flows would be LOUD possibly too loud for comfort. and here i am with a quiet ass exhaust. it just doesnt make sense
 

wythors

Get off my lawn!!!
Founding Member
May 17, 2000
2,277
35
69
C Addle
Oct 18, 2005
#68
  • Oct 18, 2005
  • #68
Flowmasters "break in"?!?!?!?!?

You guys slay me!!!! I've had Flows on my car for 8 years. The only time the sound changed was when I put my x-pipe on. "Break in". Get a grip.
 

cevtv

Founding Member
Sep 15, 2002
1,113
0
37
58
Massachusetts
Oct 18, 2005
#69
  • Oct 18, 2005
  • #69
Shakerhood said:
Well its been fun going back and forth about all of the Theories why people imagine their Flows are getting louder, but today we can end it with FACT. I called Flowmasters Tech Department, remember these are the people that design, manufacture and test these exhaust systems. I was told the sound of a Flowmaster WILL NOT change in sound over its life. Every Theory that was posted on here was completely debunked by the Tech Department!
Click to expand...


 

cevtv

Founding Member
Sep 15, 2002
1,113
0
37
58
Massachusetts
Oct 18, 2005
#70
  • Oct 18, 2005
  • #70
CoupedUp said:
Straight from the source huh
Are these the same guys that designed the cat-backs with too small of a ball-socket flare on the kits.

"Tech department"


They get louder, period.
Click to expand...


Geez.........admit it, you have been

 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,357
209
114
Ohio
Oct 18, 2005
#71
  • Oct 18, 2005
  • #71
wythors said:
Flowmasters "break in"?!?!?!?!?

You guys slay me!!!! I've had Flows on my car for 8 years. The only time the sound changed was when I put my x-pipe on. "Break in". Get a grip.
Click to expand...


Thank You!
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,357
209
114
Ohio
Oct 20, 2005
#72
  • Oct 20, 2005
  • #72
Mopar1970440 said:
yeah i never noticed a change in my flows i had for over 3-4 years.....i figured they might get quieter if anything as carbon builds up in them over time and kinda dampens the sound....but never noticed a change.
Click to expand...

That is my thought too, if anything extensive carbon build up would dampen sound and restrict flow.
 

CoupedUp

Banned
Aug 26, 2005
260
0
0
Gone Fishing
Oct 21, 2005
#73
  • Oct 21, 2005
  • #73
Shakerhood said:
The Ball and Socket matched up with my Bassani X Pipe with no problem, and my sound sure hasnt changed over the last 5 years. You have given no Technical facts that can back up your Theory.
Click to expand...

At what temperature does an aluminized alloy melt ...
At what temperature does it distort or change temper.

I supposed you also have not noticed the deeper tone when you have the a/f ratio fat either

Look, you don't hear the change, fine ... take the Tech Departments word for it.

I'm done ... you win. They don't change tone, just the majority of us have witnessed ..... cool, I can leave it at that, can you?
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,357
209
114
Ohio
Oct 21, 2005
#74
  • Oct 21, 2005
  • #74
CoupedUp said:
At what temperature does an aluminized alloy melt ...
At what temperature does it distort or change temper.

I supposed you also have not noticed the deeper tone when you have the a/f ratio fat either

Look, you don't hear the change, fine ... take the Tech Departments word for it.

I'm done ... you win. They don't change tone, just the majority of us have witnessed ..... cool, I can leave it at that, can you?
Click to expand...

What Tech Department did you think I should have checked with, Tampax? Come on, Flowmaster makes and test them, Mine has not changed sound at all and I contacted them to prove a point thats all. We never discussed making engine changes having an effect on the sound as that will change it, but its also not distorting metal in the process. I also believe Flowmasters are made from 16 Gauge Steel and coated with aluminum on the outside to prevent corrosion, so the temp would have to be pretty damn dramatic.
 

CoupedUp

Banned
Aug 26, 2005
260
0
0
Gone Fishing
Oct 21, 2005
#75
  • Oct 21, 2005
  • #75
Shakerhood said:
What Tech Department did you think I should have checked with, Tampax? .....
Click to expand...

Maybe if you were suffering from TSS

All I'm saying is I could call their "tech dept" and ask them why both sets of my Flows got a little deeper and then I would get a different answer from a different "tech guy". Am I willing to call them and find out: NO. I will just take your word for it

I have experienced it with 2 sets of Flowmasters ... nothing substancial, but definitely deeper.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,357
209
114
Ohio
Oct 21, 2005
#76
  • Oct 21, 2005
  • #76
CoupedUp said:
Maybe if you were suffering from TSS

All I'm saying is I could call their "tech dept" and ask them why both sets of my Flows got a little deeper and then I would get a different answer from a different "tech guy". Am I willing to call them and find out: NO. I will just take your word for it

I have experienced it with 2 sets of Flowmasters ... nothing substancial, but definitely deeper.
Click to expand...

Over time, if your engine falls out of tune or you make some other changes your Flows may have had a slight change. There was enough people on here really discrediting themselves saying that their Flows got twice as loud after this so called break in in 2 and 3 weeks time which is just bogus! Feel free to call Flowmaster at 1-800-544-4761, I did not mislead them with the question to give me the answer that I wanted either. I asked straight up "will the sound of the Muffler change". They responded with, "there is nothing in a Flowmaster that breaks in, so the sound will not change over the life of the muffler"!
 

STANGateURlilSS

Founding Member
May 2, 2002
716
0
16
USA & SANDBOX
Oct 21, 2005
#77
  • Oct 21, 2005
  • #77
95COBRA241 said:
From the flowmaster website, they state that their "delta flows" are quieter than their "original flows" in both the 40 (2 chamber) and 50 (3 chamber) series. Also rumor has that x-pipes don't sound as good with chambered mufflers as a h-pipe. I know from experience that the x is quieter than an h so I switched back.
Click to expand...

x-pipes sound better with a packed style muffler or a spintech.. dynomax ultra flo, dynomax turbo, hooker aero chamber, etc.. or a spintech.. x-pipe and no cats and spintechs.. at wot.. not a roar like an h-pipe and flows.. its becomes a scream much like a busch series or nextel cup car...
 

5.02GO

Founding Member
Jun 26, 2001
308
0
16
Ky, Blue Sky Country
Oct 21, 2005
#78
  • Oct 21, 2005
  • #78
Yes......Deeper
 

CoupedUp

Banned
Aug 26, 2005
260
0
0
Gone Fishing
Oct 21, 2005
#79
  • Oct 21, 2005
  • #79
Shakerhood said:
Over time, if your engine falls out of tune or you make some other changes your Flows may have had a slight change. ....
Click to expand...

No actually the mufflers changed tone after about a month of daily driving in moderate weather ... but, it's all in my head and I can live with the psychosis.

 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,357
209
114
Ohio
Oct 22, 2005
#80
  • Oct 22, 2005
  • #80
http://www.flowmastermufflers.com/advantage.html


Take a few minutes and read this page from Flowmaster! Its tells you about sound change from OTHER Style Mufflers, so you can throw out another one of your Theories of getting answers from different people in the Tech Department.
 
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
Next
First Prev 4 of 5 Next Last
You must log in or register to reply here.

Similar threads

For Sale Trick Flow Box R Series Upper Intake w/90 mm Inlet
  • Habu135
  • Apr 30, 2026
  • Engine and Power Adder
Replies
1
Views
228
Engine and Power Adder Jun 11, 2026
Habu135
J
SN95 Hello new to this app
  • James S
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
123
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 11, 2026
Habu135
D
Fuel Erratic Fuel Pressure 1985 GT
  • DienstXIV
  • Jan 14, 2026
  • Fox 5.0 Mustang Tech
Replies
16
Views
708
Fox 5.0 Mustang Tech Jan 16, 2026
AeroCoupe
G
Quiet my 2015 GT on the cheap
  • gsrblack
  • Feb 12, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
6
Views
786
2015 - 2023 (S550) Mustang -General/Talk Apr 16, 2025
gkomo
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
160
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?