• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

noisy rockers

  • Thread starter Thread starter jrod92
  • Start date Start date Oct 11, 2005
J

jrod92

Member
Jun 17, 2004
66
0
7
Oct 11, 2005
#1
  • Oct 11, 2005
  • #1
i have 1.7 roller rockers on my mustang and they seem rather loud. are they suppose to be a bit louder than stock? if not how can i fix them. what is the correct method for adjusting them? thanks
 
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
Oct 11, 2005
#2
  • Oct 11, 2005
  • #2
You sure its not the tappets making the extra noise due to the higher then stock lift ?
 
J

jrod92

Member
Jun 17, 2004
66
0
7
Oct 11, 2005
#3
  • Oct 11, 2005
  • #3
that could be but on other modified stangs they just dont seem as loud, i know the x303 is not a very common streeter cam though so maybe thats the case
 
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
Oct 11, 2005
#4
  • Oct 11, 2005
  • #4
Im in the same situation as yourself after installing my new nx264 cam, I thaught the old used roller tappets could handle the extra lift but they are making more noise then I would like... Im kinda new to all this but how could the rockers be making the noise wouldnt it most likely be the tappets which would in turn make the rockers noisy?
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Oct 12, 2005
#5
  • Oct 12, 2005
  • #5
You guys should indicate if your using pedistal or stud mount rockers. I have studs, used a new set of FRPP lifters, new 6.45" pushrods (correct geometry) and 1.7 rockers. Mine are noisy as heck and the puzzling thing is one side (passenger) is noisier than the other. I've replaced the lifters on that side again and adjusted the valve train from 1/4 turn to 3/4 turn, fine tuned the guides and it's all still noisy on the one side. The driver's side sounds like a sewing machine which is fine to me, but the loose sounding tappet noise is not.

bump
 
You must log in or register to reply here.

Similar threads

Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
388
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
337
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
G
Engine Pushrod Length Question
  • germain101
  • Sep 22, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
741
Fox 5.0 Mustang Tech Sep 25, 2025
Noobz347
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
710
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
2001 SVT Cobra slow return to idle speed
  • phil2001svt
  • Oct 21, 2026
  • SVT Tech Forum
Replies
3
Views
153
SVT Tech Forum Nov 2, 2026
phil2001svt
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?