Now I've seen it all

Cool idea, virtually impossible to accomplish. Ever seen the size of a PSD? Nearly as wide as the entire car is...not to mention that it weighs 1000lbs by itself. I work for a Ford dealer and just did a motor job on a 6.4 PSD F350 pickup...step 1 for pulling the motor? Lift cab and body from frame.

1014091646.webp

Not impossible, ive seen it done, tons of work? yes, totally worth it to me? yes
 
The Powestroke would be Tons of work and power, but holt crap would the car be nose heavy, i like the 4 cylinder Cummins much better, the linear engines have always seemed to be more reliable in the long run anyway.
 
Just keep in mind that was the 4cy Cummins, not like what's in the performance pickups and such.

What gets me is how all that work recently done and now they want to sell it? That kind of would scare me, like it's been a constant headache so they want to be rid of their little project. It's also a ground rule that except for a few cases, you don't buy other people's projects.

If the 10commandments were 11, the 11th would be "thow shawnt buy other people's projects"
 
What's the HP on that 3.9L 4-banger vegge motor??

this is awesome we need more 4 cyl diesel stuff you think they could do 450 tq?

Not sure what the stock numbers on them are. They are identical to the 6 cylinder with 2 less cylinders. You can do all the same modifications as you would to a regular Cummins. They can pretty easily make over 450ft lbs. Find them in UPS trucks and other similar delivery trucks. My buddy got one for his early Bronco out of a Frito Lay van. It's called a 4BT
 
Those 4bt motors are awesome, they can make 450 tq pretty easy, i remember reading about one in a old bronco that was making like 900 ft lbs on over 100psi
 
Not sure what the stock numbers on them are. They are identical to the 6 cylinder with 2 less cylinders. You can do all the same modifications as you would to a regular Cummins. They can pretty easily make over 450ft lbs. Find them in UPS trucks and other similar delivery trucks. My buddy got one for his early Bronco out of a Frito Lay van. It's called a 4BT

Those 4bt motors are awesome, they can make 450 tq pretty easy, i remember reading about one in a old bronco that was making like 900 ft lbs on over 100psi

That's pretty cool, it seems like the perfect setup for an off-road vehicle.