• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

O2 sensors stuck

  • Thread starter Thread starter 92lxaz
  • Start date Start date Aug 10, 2006
9

92lxaz

Member
Jul 15, 2006
44
0
6
Chandler, Az.
Aug 10, 2006
#1
  • Aug 10, 2006
  • #1
I am having problems getting the existing H-pipe out and not the problems I thought I would have (thought the extension I had for my impact wrench wouldn't get up in where it bolts up to the headers, all good there). I can't get the O2 sensors out . Is there something I need to do or just man up. I cranked on both of them and they aren't budging.
 

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
Aug 11, 2006
#2
  • Aug 11, 2006
  • #2
There a bear to get off. I would use some PB blaster and get a piece of pipe on the end of wrench for more leverage.

Maybe even try heating it up.
 
9

92lxaz

Member
Jul 15, 2006
44
0
6
Chandler, Az.
Aug 11, 2006
#3
  • Aug 11, 2006
  • #3
I was thinking the bigger wrench w/pipe approach, I don't have a torch or anything like that. I started to think they were reverse threaded or something. Thanks.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 11, 2006
#4
  • Aug 11, 2006
  • #4
I think I got away with only removing the pass side O2 last time (I did the driver side with the H on the bench).

Very good idea with the PB blaster. I'd apply neverseize to the threads when going back on.

I find that sometimes a crescent wrench works best for breaking them loose - you dont have to worry about torquing the sensor at some goofy angle.

Good luck.
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
Aug 11, 2006
#5
  • Aug 11, 2006
  • #5
go buy a lil bottle torch at the auto parts store for under 15 bucks... they came right off for me with some heat!
 
8

89 Saleen#455

Founding Member
Dec 29, 1999
519
5
39
New England
Aug 11, 2006
#6
  • Aug 11, 2006
  • #6
Another vote for using heat, but don't heat the O2 sensor directly. Heat the area around the O2 bung hole for 5 mins, spray it with PB blaster, then heat it again for another 2-3 mins. O2's should come right out with a standard 3/8" ratchet without any problems.
 

dragnazz5.0

My "0" key d0esn't w0rk, s0 I have t0 use the zer0
Nov 19, 2005
815
5
18
mooresville, nc
Aug 11, 2006
#7
  • Aug 11, 2006
  • #7
try heating it up with a t0rch and than using a small tea candle 0r whatever kind 0f candle y0u can find. heat the bung and than put the candle there and get the wax t0 g0 d0wn int0 the threads. w0rks like a charm and w0rks really g00d 0n header studs and really rusted up b0lts.
 
9

92lxaz

Member
Jul 15, 2006
44
0
6
Chandler, Az.
Aug 11, 2006
#8
  • Aug 11, 2006
  • #8
Yeah I was going to just remove the passenger side after I started having trouble. Thanks for all of the info. I'm going to go get a little torch and do the heat, sounds like it's most effective and time saving. Thanks.
 
9

92lxaz

Member
Jul 15, 2006
44
0
6
Chandler, Az.
Aug 11, 2006
#9
  • Aug 11, 2006
  • #9
Interesting with the wax idea, never heard of that. My wife has plenty of tea candles.
 
You must log in or register to reply here.

Similar threads

Engine Keeping O2 sensors lit with long tube headers
  • keel
  • Jul 30, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
290
Fox 5.0 Mustang Tech Aug 21, 2026
Qtrhrse23
A
P0036 P0056 P0137 P0157 2020 Ford Mustang GT
  • AmkoA
  • Jun 16, 2026
  • 2024+ (S650) Mustang -General/Talk
Replies
0
Views
292
2024+ (S650) Mustang -General/Talk Jun 16, 2026
AmkoA
A
L
Engine 85 GT Excessive Idle
  • lutzkecj
  • Sep 18, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
380
Fox 5.0 Mustang Tech Sep 21, 2026
86HO5.0
8
Electrical Ron Francis Headlight / Alternator Harness
  • dan50
  • Apr 30, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
337
Fox 5.0 Mustang Tech Apr 30, 2026
dan50
G
Idle surging after warm up
  • GALLY3309
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
258
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 10, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?