odds of my high rpm nitrous 306 surviving

I'm building a 306 for my 68 Mustang, and was curious if this was too much power for the bottom end to survive. I plan on shifting between 7,000 and 7,500RPM

Stock 68 Block .030 over
10:1 compression forged TRW pistons
Eagle I beam rods
Stock crank turned .10

Comp Cams XR280R Solid Roller
242/248 dur @.50
.608/.614 lift
110LCA

Box stock AFR185CC heads with the 58CC chamber
Vic Jr Intake
Speed Demon 750 Double pumper
NOS 150HP Cheater spray
MSD Digital 6+ Ignition
Mallory Unilite Distributor

Tremec 3550 with Billet Aluminum Flywheel and Centerforce D/F Clutch

4.56 Gear with Track lock (until I blow up my 8" and go with a 9" and probably 4.10's)

Rick 91GT said:

Is that a "0 Internal balance motor" if so you may be OK but keep the tune in check, detonation will make the crank walk and take out the block.

Now if it is a 50 oz or 28oz motor I am not feeling as good....

The TUNE will be the key.,

Click to expand...

Its a 28oz balance

I'd be thinking that I wouldn't have much of a problem with detonation since I'll be running aluminum heads, 10:1 compression, and 93 octane