• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Oil level indicator

  • Thread starter Thread starter Keyvon
  • Start date Start date Oct 12, 2005
K

Keyvon

New Member
Oct 12, 2005
7
0
0
Oct 12, 2005
#1
  • Oct 12, 2005
  • #1
Does any one know are the threads on the oil level indicator, pipe thread,or some thing different? The plastic part on my indicator where it screws in the pan is broken off so it is leaking out of the plastic.I want to unscrew it and plug it ANY help appreiciated!!!
 

The Shape

Founding Member
Jan 11, 2002
2,224
8
49
East ARKANSAS Delta
Oct 12, 2005
#2
  • Oct 12, 2005
  • #2
It isn't pipe thread. I am not sure of the thread , but I had the same problem as you are having. What I did was just take it out and carry it to the hardware store and match it up with a bolt. I put the bolt in with a large washer and some copper RTV about a year and a half ago and it hasn't leaked since.
 
K

Keyvon

New Member
Oct 12, 2005
7
0
0
Oct 12, 2005
#3
  • Oct 12, 2005
  • #3
Thaks for the reply! I didn't think it would be pipe thread,I have not taken it out yet,but that sounds like an idea maybe cut a gasket for under the washer or try an o-ring and sealer. I'll pull it this weekend and head for the hardware store!!
 
You must log in or register to reply here.

Similar threads

A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
R
Electrical 1987 Map Light
  • Riley Barth
  • May 30, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
420
Fox 5.0 Mustang Tech Jul 6, 2026
Riley Barth
R
J
Engine Coolant leak from oil filter
  • jr273
  • Mar 26, 2026
  • SN95 4.6L Mustang Tech
Replies
9
Views
385
SN95 4.6L Mustang Tech Mar 31, 2026
squeak93
B
Axleback installation
  • Bob Foos
  • Jun 13, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
3
Views
227
2005 - 2014 S-197 Mustang -General/Talk- Jun 15, 2026
Noobz347
J
'04 3.8L V6 mineral deposits and oil on #3 cylinder. Does it need a rebuild or something simpler?
  • joeybuddy96
  • Mar 18, 2026
  • SN95 V6 Mustang Tech
Replies
15
Views
689
SN95 V6 Mustang Tech Sep 29, 2026
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?