ok it's a long story but i'm having problems with oil pan clearance from the oil pump and the oil pickup with my stock pan. it's putting quite a damper on my project so far and i don't have 300 to get a canton like i planned. so i turned to my handy dany uncle who has been racing his whole life and now has a custom bike shop. he said that he use to build oil pans for his race car and he has alot of tools for bending/welding etc. metal because of the bike shop so he told me he would build me a custom pan. but i have to have one to get the demensions and make sure it's going to fit. ok so i guess what i'm asking is if anyone has one or knows a link i can get to get deminsions. i have the stock pan like i said to make the fit but it's going to be a 7 quart so i wanted to see if there was a website with demensions. thanks for any help