Oil Pressure Guage

J

J's90LX

New Member

Jul 3, 2003

9

0

0

Roseville,CA

Nov 16, 2003

#1

• Nov 16, 2003

• #1

How do i hook it up, its a mechanical guage, i know i have to run the tubing but i dont know what to hook it up to, anyone?

 

P

Pop-Pops-Pony

Founding Member

Nov 5, 2001

254

0

0

Sharpsburg, MD.

Nov 16, 2003

#2

• Nov 16, 2003

• #2

Easy..

You run it to the old elec. oil sender in front of the oil filter..(5.0)
Either unscrew the sender (looks like the taco bell sign) and use or get the fittings for the new gauge line to match the threads there...

Or....Pull the hex tube off completly (unscrew)and have it drilled and taped for the adapter...Remember the adapter is pipe thread (NPT)...Clean out the tube very good and put everything back and you can use both gauges...

 

J

J's90LX

New Member

Jul 3, 2003

9

0

0

Roseville,CA

Nov 16, 2003

#3

• Nov 16, 2003

• #3

so i just take off the sender and screw the fittings in where the sender was?

 

BlackFox5.0

Founding Member

Aug 7, 2000

3,514

1

0

Massachusetts

Nov 16, 2003

#4

• Nov 16, 2003

• #4

yes, but only the new gauge will work, if oyu want the stock gauge to work too, you will have to get a T fitting

 

D

DallasJ_TSi

Member

Mar 2, 2004

54

0

7

Jul 29, 2004

#5

• Jul 29, 2004

• #5

Does anyone have the correct sizes for this? I need to do this, but I want to pull it apart once, and when I change my oil instead of 2 times.

-Dallas J

 

BlackFox5.0

Founding Member

Aug 7, 2000

3,514

1

0

Massachusetts

Jul 29, 2004

#6

• Jul 29, 2004

• #6

Oil doesn't really come out of it when you take it out...if thats what your suggesting. I forget the size, just take your stock sender to home depot to the brass fitting section.

 

D

DallasJ_TSi

Member

Mar 2, 2004

54

0

7

Jul 29, 2004

#7

• Jul 29, 2004

• #7

I guess when I get around to changing the oil and have the filter off ill just pull that sending unit then drive to Home Depot and get everything fitting the right way... I guess I just wanted a cheap way out

-Dallas J

 

BlackFox5.0

Founding Member

Aug 7, 2000

3,514

1

0

Massachusetts

Jul 29, 2004

#8

• Jul 29, 2004

• #8

I changed everything on mine including installing a vortech feed line, and a brass tube block extension since mine broke(not a good idea I need to change back to stock because it's leaking because I can't tighten it enough, the feed line hits the block before it's tight.) No need ot do it from underneath while the filter is out....but if it makes life easier for you...

 

D

DallasJ_TSi

Member

Mar 2, 2004

54

0

7

Jul 29, 2004

#9

• Jul 29, 2004

• #9

I cant even see the sending unit from above on my 94. I figure that since ill be under there i might as well do it then.

-Dallas J

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jul 29, 2004

#10

• Jul 29, 2004

• #10

IIRC the stock sender is 1/4" threads. i ran a 1.5 or 2" extension from the hex tube, to give my senders room (i have electric senders on both oil gauges, which you dont have).

i would get a new sender from the parts store, for your oem gauge- they are cheap and while the stocker sucks, a new sender may make it less vacuous.

good luck.

 

D

DallasJ_TSi

Member

Mar 2, 2004

54

0

7

Jul 29, 2004

#11

• Jul 29, 2004

• #11

Ill go up to autozone this weekend and try and get a new sensor. Thanks for the advice.

I guess it makes sense though since im having issues with it and itll be out anyways

-Dallas J

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jul 30, 2004

#12

• Jul 30, 2004

• #12

DallasJ_TSi said:

Ill go up to autozone this weekend and try and get a new sensor. Thanks for the advice.

I guess it makes sense though since im having issues with it and itll be out anyways

-Dallas J

Click to expand...

that was what i thought too - since i was retaining the stock gauge (as well as the new one), i might as well have it be as accurate as possible.
you have a good plan. good luck.