I installed a new oem oil pump and buttoned up the pan and then read that you need to prime the pump before installing. Just wondering if it will pull it with a drill primer with no oil in the pump or do I need to pull the pan off and fill the pump with oil?
if it wont pull up oil press, I think you can take the oil filter off and squirt oil in the holes and it will run down in the pump, then put the drill back on ,, and the filter back on
I've used a plain old Craftsman 1/4" drive, 5/16 socket and a long extension before. It fits into the opening and as long as you're careful it won't pop off the extension and fall into the motor. Worked for me.