• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Oil pump

  • Thread starter Thread starter 87 black gt
  • Start date Start date Mar 11, 2018

87 black gt

Member
Jan 24, 2016
70
12
18
Mar 11, 2018
#1
  • Mar 11, 2018
  • #1
looking for input on a oil pump for 302 that I am rebuilding I have been reading a lot of articles to see which ones work well, all have there pros and cons just looking for a good stock replacement. The car will only be used on the street any suggestions will be appreciated
 

RangerJoe

I leave the horn on while driving
15 Year Member
Apr 26, 2010
2,560
1,146
184
Georgia
Mar 11, 2018
#2
  • Mar 11, 2018
  • #2
A standard melling replacement will work just fine. If you want a little upgrade, but an ARP shaft for it. I went with a high volume unit with the first time around and did not pick up on the fact that the pump is slightly taller and many times does not clear the stock pan. It rubbed the inside of the pan until it formed a leak. Went back to a standard pump for last 4 years with no issues.

Joe
 
Reactions: General karthief

Steel1

Mustang Master
Aug 18, 2017
1,419
639
143
Connecticut
Mar 11, 2018
#3
  • Mar 11, 2018
  • #3
I second that, standard melling pump with ARP shaft.
Not too long ago I turned an ARP oil pump drive shaft into a twizzler,
not ARPs fault, caused by a faulty rocker arm c-clip that got lodged in the pump!!
 

87 black gt

Member
Jan 24, 2016
70
12
18
Mar 11, 2018
#4
  • Mar 11, 2018
  • #4
RangerJoe said:
A standard melling replacement will work just fine. If you want a little upgrade, but an ARP shaft for it. I went with a high volume unit with the first time around and did not pick up on the fact that the pump is slightly taller and many times does not clear the stock pan. It rubbed the inside of the pan until it formed a leak. Went back to a standard pump for last 4 years with no issues.
RangerJoe said:
A standard melling replacement will work just fine. If you want a little upgrade, but an ARP shaft for it. I went with a high volume unit with the first time around and did not pick up on the fact that the pump is slightly taller and many times does not clear the stock pan. It rubbed the inside of the pan until it formed a leak. Went back to a standard pump for last 4 years with no issues.

Joe
Click to expand...
Thanks sounds good I will get both
Click to expand...
 

87 black gt

Member
Jan 24, 2016
70
12
18
Mar 11, 2018
#5
  • Mar 11, 2018
  • #5
RangerJoe said:
A standard melling replacement will work just fine. If you want a little upgrade, but an ARP shaft for it. I went with a high volume unit with the first time around and did not pick up on the fact that the pump is slightly taller and many times does not clear the stock pan. It rubbed the inside of the pan until it formed a leak. Went back to a standard pump for last 4 years with no issues.
RangerJoe said:
A standard melling replacement will work just fine. If you want a little upgrade, but an ARP shaft for it. I went with a high volume unit with the first time around and did not pick up on the fact that the pump is slightly taller and many times does not clear the stock pan. It rubbed the inside of the pan until it formed a leak. Went back to a standard pump for last 4 years with no issues.

Joe
Click to expand...
Thanks sounds good I will get both
Click to expand...
 

rbohm

Founding Member
Apr 12, 2002
6,698
550
204
tucson,az
Mar 11, 2018
#6
  • Mar 11, 2018
  • #6
i also recommend the stock melling replacement oil pump and the ARP drive shaft.
 
You must log in or register to reply here.

Similar threads

S
Best Ebay aftermarket Radio/screen
  • Shurkeel
  • Oct 8, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
139
2005 - 2014 S-197 Mustang -General/Talk- Oct 9, 2026
gkomo
D
Loud noise(s) from Engine Bay
  • DuluthFoxbody
  • Oct 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
369
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 5, 2026
AeroCoupe
A
SN95 Multifunction Madness! Need some big brain assistance from you folks
  • Awnaw
  • Oct 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
134
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Tuesday at 5:36 PM
AeroCoupe
A
Catch can questions.
  • AngryH58
  • Sep 26, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
168
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2026
squeak93
B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?