Oil pump

87 black gt

Member
Jan 24, 2016
70
12
18
looking for input on a oil pump for 302 that I am rebuilding I have been reading a lot of articles to see which ones work well, all have there pros and cons just looking for a good stock replacement. The car will only be used on the street any suggestions will be appreciated
 
A standard melling replacement will work just fine. If you want a little upgrade, but an ARP shaft for it. I went with a high volume unit with the first time around and did not pick up on the fact that the pump is slightly taller and many times does not clear the stock pan. It rubbed the inside of the pan until it formed a leak. Went back to a standard pump for last 4 years with no issues.

Joe
 
  • Like
Reactions: General karthief
I second that, standard melling pump with ARP shaft.
Not too long ago I turned an ARP oil pump drive shaft into a twizzler,
not ARPs fault, caused by a faulty rocker arm c-clip that got lodged in the pump!!
 
A standard melling replacement will work just fine. If you want a little upgrade, but an ARP shaft for it. I went with a high volume unit with the first time around and did not pick up on the fact that the pump is slightly taller and many times does not clear the stock pan. It rubbed the inside of the pan until it formed a leak. Went back to a standard pump for last 4 years with no issues.
A standard melling replacement will work just fine. If you want a little upgrade, but an ARP shaft for it. I went with a high volume unit with the first time around and did not pick up on the fact that the pump is slightly taller and many times does not clear the stock pan. It rubbed the inside of the pan until it formed a leak. Went back to a standard pump for last 4 years with no issues.

Joe
Thanks sounds good I will get both
 
A standard melling replacement will work just fine. If you want a little upgrade, but an ARP shaft for it. I went with a high volume unit with the first time around and did not pick up on the fact that the pump is slightly taller and many times does not clear the stock pan. It rubbed the inside of the pan until it formed a leak. Went back to a standard pump for last 4 years with no issues.
A standard melling replacement will work just fine. If you want a little upgrade, but an ARP shaft for it. I went with a high volume unit with the first time around and did not pick up on the fact that the pump is slightly taller and many times does not clear the stock pan. It rubbed the inside of the pan until it formed a leak. Went back to a standard pump for last 4 years with no issues.

Joe
Thanks sounds good I will get both