Opened some boxes from UPS!!!

95GTvert[bv12] · Sep 3, 2004

Now to install the damn thing

Road_Runna · Sep 3, 2004

It looks like some headers. A y pipe ? Turbo ?

95GTvert[bv12] · Sep 3, 2004

Road_Runna said:
It looks like some headers. A y pipe ? Turbo ?

Yup i still need the oil feed line, injectors, MAF, gaskets, v band clamps, and a tune...but after all that i think i will be in the 350-380rwhp range and hopefuly 400lb/tq

Road_Runna · Sep 3, 2004

95GTvert[bv12] said:
Yup i still need the oil feed line, injectors, MAF, gaskets, v band clamps, and a tune...but after all that i think i will be in the 350-380rwhp range and hopefuly 400lb/tq

I think your flowmasters are gonna be somewhat restrictive (back pressure).

If you don't mind me asking where did you purchase it ? and how much ?

Good luck on your setup, and remember; If you have it, flaunt it. so get an extreme blow off valve.

95GTvert[bv12] · Sep 3, 2004

haha i like to hide it thats why i am going with a Bypass valve...i know the flows will be restrictive but i might just dump it at Y pipe....Hopefuly by the end of this month my car will be on the road for a short while till i break my tranny

Prices
925 shipped custom headers, cross over, dp, y pipe,...cold side...and wastegate
140 shipped turbo....Holset WH1C 58mm wheel 450ish rwhp maybe more

1065 total so far

harley02 · Sep 3, 2004

how much for the equal lengths and matching xpipe????willing to ship?Im located in TampaBay area,,FL.

94GTStang · Sep 3, 2004

You've got a floor jack in your living room...

xYoung347x · Sep 3, 2004

95GTvert[bv12] said:
haha i like to hide it thats why i am going with a Bypass valve...i know the flows will be restrictive but i might just dump it at Y pipe....Hopefuly by the end of this month my car will be on the road for a short while till i break my tranny

Prices
925 shipped custom headers, cross over, dp, y pipe,...cold side...and wastegate
140 shipped turbo....Holset WH1C 58mm wheel 450ish rwhp maybe more

1065 total so far

dam thats cheap! Hot side for PTK is over a grand itself. What company/who did you go to?

1105 · Sep 3, 2004

I want to see pictures of that thing wrapped up in plastic!!! Quit holding out on us

Road_Runna · Sep 3, 2004

Don't you need an intercooler for a turbo app, or is it optional as long as you run little boost ?

1105 · Sep 3, 2004

You dont need an intercooler if you are going to be running no more than 10psi, but its always nice to have one.

mystang94gt · Sep 3, 2004

95GTvert[bv12] said:
haha i like to hide it thats why i am going with a Bypass valve...i know the flows will be restrictive but i might just dump it at Y pipe....Hopefuly by the end of this month my car will be on the road for a short while till i break my tranny

Prices
925 shipped custom headers, cross over, dp, y pipe,...cold side...and wastegate
140 shipped turbo....Holset WH1C 58mm wheel 450ish rwhp maybe more

1065 total so far

Make sure and post a thread when you get it together and plan on headin to the track. I'll have to come see it in action!!

95snoozer · Sep 3, 2004

what company did you go with?

or was this used?

i know the turbo had to be

OrangeMustangGt · Sep 3, 2004

yeah, please let us know where you found such a deal, a turbo kit for a grand? wtf! please tell!

OinkAodeOink · Sep 3, 2004

nice nice... but i wouldnt account for just 350RWHP... you wont have a problem making 400RWHP or more.. on higher boost.. You might want to invest in a water injection kit though.

I made 472 horse ( supper rich) capable of 525 im sure.. on a 57mm turbo
This is through an AODE.. so that turbo will support more then enough to do the block in!

Jimmy26 · Sep 3, 2004

Start looking for a bigger fuel system

VibrantRedGT · Sep 3, 2004

So your turbo charging the floor jack? Should be able to lift anything with all the TQ.

OinkAodeOink · Sep 3, 2004

Jimmy26 said:
Start looking for a bigger fuel system

If your going that far, might as well go for a Dart block, cage, custom cam, forged bottom end.. ect..

Theres a fine line between a 500-550rwhp car, and a 600+..... Once you go over 550 or so, it starts getting expensive, real expensive

Road_Runna · Sep 4, 2004

What I want to know is where did he get it at ?

Road_Runna · Sep 4, 2004

What I would like to know is, where did he purchase everything at ?

I've been looking wanting some boost on my car for a while, and was even smittened by Vortech's 2,500 Superchargers systems.

And I don't wanna go Nitrous because filling up the bottle everytime isn't something that I would wanna do.

But for 2 K to spend on a turbo kit, would be even better.

Opened some boxes from UPS!!!

95GTvert[bv12]

Attachments

Road_Runna

95GTvert[bv12]

Road_Runna

95GTvert[bv12]

harley02

New Member

94GTStang

xYoung347x

New Member

1105

I AM the random post master...bow down

Road_Runna

1105

I AM the random post master...bow down

mystang94gt

New Member

95snoozer

Active Member

OrangeMustangGt

OinkAodeOink

Jimmy26

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

OinkAodeOink

Road_Runna

Road_Runna

Similar threads

Opened some boxes from UPS!!!

Attachments

New Member

New Member

I AM the random post master...bow down

I AM the random post master...bow down

New Member

Active Member

"STANGNET'S PENGUIN SMACKER"

Similar threads

Privacy & Transparency

Privacy & Transparency