9 90stangLX302 New Member Dec 2, 2003 76 0 0 Good ol' Bellaire Ohio Feb 25, 2004 #1 Feb 25, 2004 #1 What all will need to be done when putting Gt-40p's on a 302, besides p-specific headers. thanks
9 90stangLX302 New Member Dec 2, 2003 76 0 0 Good ol' Bellaire Ohio Feb 25, 2004 #2 Feb 25, 2004 #2 Will i need custom sparkplug caps?
Mustang5L5 That is…until I whipped out my Bissell Mod Dude Feb 18, 2001 43,164 17,860 224 Massachusetts Feb 25, 2004 #3 Feb 25, 2004 #3 Heads with upgraded springs. P-specific headers Vortech S-trim That's about it. My buddy got his FMS wires to work fine with the P heads and FRPP P headers
Heads with upgraded springs. P-specific headers Vortech S-trim That's about it. My buddy got his FMS wires to work fine with the P heads and FRPP P headers
SwAmPf0x Founding Member Dec 29, 2001 1,423 0 37 Hell Hole Swamp Feb 25, 2004 #4 Feb 25, 2004 #4 Might need longer pushrods...some do some dont, so make sure the lifter preload is right when you install the rockers or you'll have problems, stock spark plug wires work but are close on a few cylinders...90 degree boots are best
Might need longer pushrods...some do some dont, so make sure the lifter preload is right when you install the rockers or you'll have problems, stock spark plug wires work but are close on a few cylinders...90 degree boots are best
9 90stangLX302 New Member Dec 2, 2003 76 0 0 Good ol' Bellaire Ohio Feb 26, 2004 #5 Feb 26, 2004 #5 Where can i get 90 degree boots from with the stock wire length? I found some universal ones but i dont know if the wires will be long enough.
Where can i get 90 degree boots from with the stock wire length? I found some universal ones but i dont know if the wires will be long enough.
SwAmPf0x Founding Member Dec 29, 2001 1,423 0 37 Hell Hole Swamp Feb 26, 2004 #6 Feb 26, 2004 #6 make your own, or buy a set of coughchevycough wires