• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Overheating Problem

  • Thread starter Thread starter marine_2003
  • Start date Start date Mar 12, 2006

marine_2003

Member
Jun 6, 2005
427
0
16
Lake County, FL
Mar 12, 2006
#1
  • Mar 12, 2006
  • #1
I didnt really have a problem until i put on my aluminum heads. I just recently noticed that i have a radiator, thats set for tranny lines, but i have a 5 speed tranny. Is that my problem??

Thanks

Anthony
 

vikingpower

New Member
Dec 6, 2004
656
0
0
CWU Ellensburg, WA
Mar 12, 2006
#2
  • Mar 12, 2006
  • #2
marine_2003 said:
I just recently noticed that i have a radiator, thats set for tranny lines,
Click to expand...

What exactly does that mean
 

marine_2003

Member
Jun 6, 2005
427
0
16
Lake County, FL
Mar 12, 2006
#3
  • Mar 12, 2006
  • #3
it looks like this one, with the holes on the left/drivers side for the tranny cooler lines
 

Attachments

  • CR5029.webp
    31.9 KB · Views: 177

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 12, 2006
#4
  • Mar 12, 2006
  • #4
Having a rad with trans-line heat-exchanger lines is not the source of your issue.

Good luck.
 

maverick0716

Founding Member
Jan 12, 2002
3,924
0
56
Chilliwack, BC, Canada
Mar 12, 2006
#5
  • Mar 12, 2006
  • #5
Actually a lot of aftermarket rads already have a tranny cooler inside them....they just come that way.

Take a look at your water pump, thermostat, etc...I bet one of those is the root of your problem.
 
J

jerryD

Founding Member
Mar 16, 2000
1,061
0
37
Gladstone, MO
Mar 12, 2006
#6
  • Mar 12, 2006
  • #6
did you put the head gaskets on right? did you burp the cooling system?
 
F

fox_bodies_rule

Member
Apr 17, 2005
34
0
6
Mar 12, 2006
#7
  • Mar 12, 2006
  • #7
Not to insult your mechanical skills but are you sure you put the head gaskets on right? "front" should be showing and at the front of the block.
 

thegabrielles

Member
Feb 26, 2003
516
1
16
Atlanta Georgia
Mar 12, 2006
#8
  • Mar 12, 2006
  • #8
FMS sold an "aftermarket" radiator that was a three core radiator, it actually was built for an automnatic so it has a trans cooler built into it. Cap of the lines and dont worry about it.
As far as the overheating goes give us some more detail. Does it overheat just at adle, when driving in traffic, whiel driving down the highway? I am guessing you are not loosing any antifreeze, right? What all was changed when you did the heads? water pump, thermostat, etc. It could be any number of things..

I love the 85-86 GT, one of my favorite fox stangs. Looks like a heck of a car.
 
F

fox_bodies_rule

Member
Apr 17, 2005
34
0
6
Mar 12, 2006
#9
  • Mar 12, 2006
  • #9
sorry, just saw jerryD post...beat me by about a second I think! *LOL*
 

marine_2003

Member
Jun 6, 2005
427
0
16
Lake County, FL
Mar 15, 2006
#10
  • Mar 15, 2006
  • #10
I had a mechanic install the heads, I switched to an Edelbrock High Flow Reverse Rotation water pump, and am not runnging a thermostat, but a restrictor plate, since i put in the plate, it takes longer for it to heat up, but it gets hot while at idle, while driving. I also changed out the radiator cap, because i was told that that could be causing it. Im still stumped.
Im going to try getting a new radiator, since i dont know how old the one in my car is, it was in the car when i got it, and i really dont know the condition of it, im also going to get a bigger cooling fan, i will be getting the Black Magic 3300 cfm cooling fan. Hopefully that works.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Mar 15, 2006
#11
  • Mar 15, 2006
  • #11
marine_2003 said:
I had a mechanic install the heads, I switched to an Edelbrock High Flow Reverse Rotation water pump, and am not runnging a thermostat, but a restrictor plate, since i put in the plate, it takes longer for it to heat up, but it gets hot while at idle, while driving. I also changed out the radiator cap, because i was told that that could be causing it. Im still stumped.
Im going to try getting a new radiator, since i dont know how old the one in my car is, it was in the car when i got it, and i really dont know the condition of it, im also going to get a bigger cooling fan, i will be getting the Black Magic 3300 cfm cooling fan. Hopefully that works.
Click to expand...

Wait!
Don't go out and buy a bunch of parts yet, just put in a T-stat; either 180F or 195F.
Without a stat the coolant can flow past the radiator too quickly to cool properly. how bad this is will depend on how well the restrictor plate is sized for your application. Since you are having problems, I doubt any trial and error testing was done. The stock stat setup is about as good as it gets, no need to mess with it.

Why the reverse flow pump? Did you get a reverse flow fan to match? I know some folks have had to use them, but I don't remember the application.
EDIT: Never mind. The fox bodies have the reverse flow pumps. I was thinking that MY CAR was normal, and other applications would be the "reverse" of that.
Thanks for pointing that out JT, I didn't even realize it until after I replied to your pm.
By the way my avatar is a pic of me!

jason
 
H

Hoffman

New Member
Sep 11, 2004
27
0
0
Mar 16, 2006
#12
  • Mar 16, 2006
  • #12
I don't think he got the head gasket on backwards, my stupid ass done that before. It just filled one of the pistons up with water and was very noticable.
 

marine_2003

Member
Jun 6, 2005
427
0
16
Lake County, FL
Mar 16, 2006
#13
  • Mar 16, 2006
  • #13
I tried a 160, 180 and a 195 thermostat before getting the restrictor, and they didnt work, i am in the process of building another car and will need a new radiator and fan anyways.
 
You must log in or register to reply here.

Similar threads

P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
179
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
Engine 1986 GT Overheating issues
  • 86 5O GT
  • Jan 25, 2026
  • Fox 5.0 Mustang Tech
Replies
18
Views
966
Fox 5.0 Mustang Tech Jan 29, 2026
86 5O GT
A
Overheating!
  • ashleyg
  • Aug 6, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
201
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 9, 2026
limp
Strange timing issue
  • 92 Bimini Blue
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
738
Fox 5.0 Mustang Tech Oct 20, 2026
rednotch
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
527
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?