• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

P0122 & P1125

  • Thread starter Thread starter rispoli_23
  • Start date Start date May 22, 2010
  • 1
  • 2
Next
1 of 2 Next Last

rispoli_23

Member
Jul 7, 2008
182
0
16
May 22, 2010
#1
  • May 22, 2010
  • #1
LAST NIGHT I TOOK MY TPS SENSOR OFF TO CHECK IT PUT IT BACK ON STARTED IT THE CAR KNOCKED LIKE CRAZY (WTH) SO I SHUT IT OFF TOOK IT BACK OFF AND BACK ON AND THE KNOCK SLOWY WENT AWAY WEIRD RIGHT >>>> THEN I DROVE IT THIS MORNING TO WORK AND CEL P0122 AND P1125 CAME ON AND CAR STARTED JERKING AND STARTED DIEING AND LOST ALL POWER .. I MADE IT WORK FINALLY AND CHECKED THE CODES AND I CHECKED TO MAKE SURE THE CONNECTOR WAS TIGHT AND IT IS ... DO I NEED A NEW TPS ?? IT WAS FINE DEFORE I TOUCHED IT AND ITS A 99 STANG GT SO ITS NOT ADJUSTABLE
 

Night Shifter

Well-Known Member
Dec 24, 2005
1,710
27
59
Daytona
May 22, 2010
#2
  • May 22, 2010
  • #2
holy caps lock batman!

i do believe you car hates you
 

rispoli_23

Member
Jul 7, 2008
182
0
16
May 22, 2010
#3
  • May 22, 2010
  • #3
dude i swear my car is cursed lol , i never had an issue with it until i put my cams in kinda makes me wish i did a blower instead haha ... i put a new tps sensor on it and now it runs fine i gues i messed the old one up somehow when i took it off ... my tuner is getting next week and degreeing the cams so ill keep u guys posted ..
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
May 22, 2010
#4
  • May 22, 2010
  • #4
Check fuses, inspect connectors

Start by checking all of your fuses. Esp fuse F2.8.

Next inspect the closely inspect the connector. Look for loose/bent pins. Broken/chaffed wires at the connector. It is most likely to be related to the recent work done.

>>From Ford service CD
P0125 - Insufficient Coolant Temperature For Closed Loop Fuel Control
TP sensor not seated properly
TP circuit open to PCM
VREF open to TP sensor
TP circuit short to GND
Damaged TP sensor
Damaged PCM

P0125 - Insufficient Coolant Temperature For Closed Loop Fuel Control
Insufficient warm up time
Low engine coolant level
Leaking or stuck open thermostat
Malfunctioning ECT sensor
Malfunctioning CHT sensor
 

rispoli_23

Member
Jul 7, 2008
182
0
16
May 22, 2010
#5
  • May 22, 2010
  • #5
off subject how do u get ur mods and stuff to show up at the bottom of your post
 

rispoli_23

Member
Jul 7, 2008
182
0
16
May 22, 2010
#6
  • May 22, 2010
  • #6
nevermind got it sorry
 

Night Shifter

Well-Known Member
Dec 24, 2005
1,710
27
59
Daytona
May 23, 2010
#7
  • May 23, 2010
  • #7
dont feel bad..even after i got my car tuned mine stalls like a mofuga...all the damn time..annoying as hell
 

csledd

Official Ovary Punching Member
Founding Member
Aug 18, 2001
1,115
1
0
Paducah, KY
May 23, 2010
#8
  • May 23, 2010
  • #8
my TPS randomly broke once too. Put on an Accufab TB and plenum and drove 3 hours to get a tune, after one run on the dyno the TPS died. We put a new one on and things were going again, it was quite strange.
 

rispoli_23

Member
Jul 7, 2008
182
0
16
May 23, 2010
#9
  • May 23, 2010
  • #9
Nightshifter now u tell me ur car dies ughhh this whole time I thought my car was cursed ... hopefully It gets better after the cams get degreed .... are urs degreed.
. And the tps that broke was like a year old ... damn sensors
 

Night Shifter

Well-Known Member
Dec 24, 2005
1,710
27
59
Daytona
May 24, 2010
#10
  • May 24, 2010
  • #10
lol sorry in the delayed info man. maybe i too need a new tps. yeah, my cams are degreed..

weirdest thing, i was throwing 02 sensor codes for both front 02's...had been for a while.. but this time my car was stumbling like crazy at low rpms and just being annoying as hell..it would stall, but very seldomly.. sometimes it wouldnt stall for a few days and some times when it stalled it would take me forever to turn back on..

then, i put new 02 sensors in, and the car drove smooth as smooth could be and it really woke the car back up. BUT, ever since i put the new 02 sensors in my car dies ALL the time now....with the old sensors it would idle sometimes, but with the new ones, yeah forget about idling at all lol...most mornings on the way to work it dies in the driveway and at least twice out on the road unless i keep it in the throttle at idle... i even had it tuned after the new 02's and it still sucks lol

maybe we both need new tps's....but dont feel alone on this one, my car hates me too..
 

rispoli_23

Member
Jul 7, 2008
182
0
16
May 24, 2010
#11
  • May 24, 2010
  • #11
that is exactly how my car acts ..... i will say sine the new tps sensor it has not died (knock on wood) ....
 

Night Shifter

Well-Known Member
Dec 24, 2005
1,710
27
59
Daytona
May 24, 2010
#12
  • May 24, 2010
  • #12
my car isnt throwing any codes or anything so i have no idea what my problem is lol

did your knocking finally go away for good? im gonna try the new tps sensor as well...id love to never stall again. when did you replace the tps on yours?
 

rispoli_23

Member
Jul 7, 2008
182
0
16
May 24, 2010
#13
  • May 24, 2010
  • #13
he knocking went away the next morning and has not came back .. the only thing i can think of is it has something to do with the tps being bad ... i put the new tps sensor on sat morning and reset my idle so far so good .... and trust me i know how frustrating it is having idle issues
 

rispoli_23

Member
Jul 7, 2008
182
0
16
May 26, 2010
#14
  • May 26, 2010
  • #14
well damn it started dying again ughhhh... im so fed up ... i wish someone had these issues and new exactly how to fix it
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
May 26, 2010
#15
  • May 26, 2010
  • #15
Do you have an ODB2 scanner? If so, monitor the TP-MODE PID. What you are looking for is the closed throttle setting (C/T) when the throttle is actually closed. For a MAF application, the TPS is not used the same way as for a speed density tune.

I suspect your problem is not with the TPS.

Next monitor the air flow, LTFT, STFT, IAC duty cycle, TPS, RPM, and load.

If I were to guess, your problem is with the MAF.
 

Night Shifter

Well-Known Member
Dec 24, 2005
1,710
27
59
Daytona
May 26, 2010
#16
  • May 26, 2010
  • #16
are there times when your car dies that it takes like 7 times to crank over?

mines getting worse...i used to die occasionally and now its every time i stop..i know your frustration...sorry i cant help though
 

Night Shifter

Well-Known Member
Dec 24, 2005
1,710
27
59
Daytona
May 26, 2010
#17
  • May 26, 2010
  • #17
maybe i might try this MAF idea..only problem is the MAF i can get my hands on is 86mm..really, do i need one that big? doubt it..

*EDIT* haha thats what she said...sorry, couldnt help myself...
 

rispoli_23

Member
Jul 7, 2008
182
0
16
May 26, 2010
#18
  • May 26, 2010
  • #18
Yes I can look at all that stuff but I don't know what numbers they should be. .. and yeah bro sometimes it takes a few times before it starts I swear I'm fed up I have spent so much money and my damn car don't run right
 

rispoli_23

Member
Jul 7, 2008
182
0
16
May 26, 2010
#19
  • May 26, 2010
  • #19
Oh and Thanks for The help. .. I Can only use my sct and I don't see a pid for closed throttle I know I can see the rpms the fuel trims and the iac duty cycle
 

rispoli_23

Member
Jul 7, 2008
182
0
16
May 26, 2010
#20
  • May 26, 2010
  • #20
Oh and load and I think tp voltage. ..
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
246
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
Engine Coolant boiling in hose?
  • Teen'93stang5.0
  • Jun 3, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
121
Fox 5.0 Mustang Tech Jun 8, 2026
Mustang5L5
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
842
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
T
Help with a 95 5L crank no start
  • TheBubbaJoe
  • Nov 4, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
409
1994 - 1995 Specific Tech Nov 5, 2025
AeroCoupe
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
809
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sunday at 2:39 PM
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?