Paint cracking on factory bumpers?

mustang2 · Sep 20, 2004

I was just wondering if anyone else is having the problem with new paint cracking on the stock urethane bumpers, like the blue 76 Cobra on ebay we've been talking about in the other thread, mentioned in his ad.

I will need to get both bumpers, and if it's common for new paint to just crack again on the factory bumpers I would have to start looking at the fiberglass ones.

TheEvII · Sep 20, 2004

The urethane bumpers have to be painted with flexable paint. You can't paint the bumpers with the same paint you paint the car with. More than likely someone painted that car and didn't change paint or add flexative for painting the bumpers.

Johan · Sep 20, 2004

mustang2 said:
...if it's common for new paint to just crack again on the factory bumpers I would have to start looking at the fiberglass ones.

I got my fiberglass bumpers from MAS Racing Products. They had the cracks already molded in. The molds were obviously taken from cracked urethane bumpers. But hey, the price was right.

Even with the original paintjob the bumpers tended to crack over time. I suspect the urethane expands and contracts quite a bit. Push-starting your buddy's Monza doesn't help either.

Mstng2 · Sep 21, 2004

What everyone else said, plus the original bumpers probably had cracks in them so what happens is when you paint over them the bumper just flexes in the cracked portion and your new paint cracks as well.

LOL I had to edit cause I wrote "plus the original bumpers probably had crack in them" bwah ha ha funny typo but I try to proof all my posts.

1970impala · Sep 21, 2004

mustang2 said:
I was just wondering if anyone else is having the problem with new paint cracking on the stock urethane bumpers, like the blue 76 Cobra on ebay we've been talking about in the other thread, mentioned in his ad.

I will need to get both bumpers, and if it's common for new paint to just crack again on the factory bumpers I would have to start looking at the fiberglass ones.

yup yup common problem for all. good luck finding the bumpers though. i found a NOS one and paid out the &&& for it as well.

TheEvII · Sep 21, 2004

LOL I had to edit cause I wrote "plus the original bumpers probably had crack in them" bwah ha ha funny typo but I try to proof all my posts.

I was gonna say, boy how times have changed! I had heard that Coka Cola actually had Cocaine in it but I didn't know Mustangs were made with crack!!

1970impala · Sep 21, 2004

TheEvII said:
I was gonna say, boy how times have changed! I had heard that Coka Cola actually had Cocaine in it but I didn't know Mustangs were made with crack!!

well, i can sure as heck can say that i have been banging my head and cracking it on the mustang trying to find the damn parts for it. urrgh!!!

1970impala · Sep 21, 2004

question

Seriously, Does anyone on here really have a good answer to this? is there anyway of repairing a hairline crack in one of these bumpers without having to paint it all over again???? does spot putty and glaze work? any ideas????

THE COBRAMAN · Sep 21, 2004

The ONLY solution I have found for this issue is a product called Standohyd stone chip primer.

Made by Standox, it is a water-based product that can be applied up to 12 mils thick, is resiliant, and will effectively fill/bridge small cracks in the OE bumper covers. It will also alleviate the stone chipping on the front bumper, valance, and spoilers.

It's not cheap, nor easy to find, but it does work. PITA to sand as well, but it does work. I used it on the last II I built, works great.

Sorry Jon, it goes under the paint.

1970impala · Sep 21, 2004

THE COBRAMAN said:
The ONLY solution I have found for this issue is a product called Standohyd stone chip primer.

Made by Standox, it is a water-based product that can be applied up to 12 mils thick, is resiliant, and will effectively fill/bridge small cracks in the OE bumper covers. It will also alleviate the stone chipping on the front bumper, valance, and spoilers.

It's not cheap, nor easy to find, but it does work. PITA to sand as well, but it does work. I used it on the last II I built, works great.

Sorry Jon, it goes under the paint.

Do you..or anyone on here do that sort of work if the bumper was sent to you?

Paint cracking on factory bumpers?

mustang2

New Member

TheEvII

New Member

Johan

Member

Mstng2

1970impala

Please God, somebody find me some WHITE CARGO PANE

TheEvII

New Member

1970impala

Please God, somebody find me some WHITE CARGO PANE

1970impala

Please God, somebody find me some WHITE CARGO PANE

THE COBRAMAN

pig 'rassler

1970impala

Please God, somebody find me some WHITE CARGO PANE

Similar threads

Paint cracking on factory bumpers?

New Member

New Member

Member

Please God, somebody find me some WHITE CARGO PANE

New Member

Please God, somebody find me some WHITE CARGO PANE

Please God, somebody find me some WHITE CARGO PANE

pig 'rassler

Please God, somebody find me some WHITE CARGO PANE

Similar threads

Privacy & Transparency

Privacy & Transparency