• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Paint Sprayer question (auto paint)

  • Thread starter Thread starter webshot
  • Start date Start date Oct 15, 2007
W

webshot

Member
Sep 11, 2005
738
0
17
Yay Area, California
Oct 15, 2007
#1
  • Oct 15, 2007
  • #1
Is this a good spray gun to use for auto painting?

http://www.homedepot.com/webapp/wcs...03+90401+500173&marketID=401&locStoreNum=8125

I have ordered 2 devilbiss sprayers and both times they came messed up. My bday is in a few days and I saw this one at home depot for a bit cheaper (plus I always get home depot gift cards for my bday) and was wondering if you guys think it would do well for spraying my car.

I am going to resurrect my painting my own car thread as soon as I get a damn spray gun so I can start
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Oct 15, 2007
#2
  • Oct 15, 2007
  • #2
Well, unfortunatley is does not say the size of the nozzle. Some are 0.8 some a 1.0 some a 1.3 and so on. Different types of paint and primer require different tip sizes. Also, see what kind of air pressure is required to run it. My gun requires 30-40psi. A customer of mine has a 600 dollar gun that only requires 15psi, so that thing uses barely any paint.

By the pic it looks to be OK, but you need to find a little bit more info.
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
Oct 15, 2007
#3
  • Oct 15, 2007
  • #3
I imagine that paint gun is probably made by devilbiss. I used to work for Sears and the Craftsman paint guns were made by devilbiss, they just aren't built to the same standard as the ones marketed as the Devilbiss brand. The Husky tools look to be quite similar as well. It probably would work just fine, you'll just need to find out all of the details like svt32vdohc mentioned above.
 
W

webshot

Member
Sep 11, 2005
738
0
17
Yay Area, California
Oct 15, 2007
#4
  • Oct 15, 2007
  • #4
Here is what one dude who reviewed it said. I will also go get more info today on it. His air compressor has the same rating as mine too.

"I used this gun to primer my car hood. I sprayed on a 2k Epoxy primer using the guns 1.4mm tip!

Which was great, since i didn't have to buy a 1.8mm tip. Since this gun is gravity feed it needed less material than a regular syphon type gun to do the same job and there was much less "bounce" than there is with my other gun(syphon type).

On one note the cup did seem a little weak, but it was pretty easy 2 cleanup. Even with a full cup, the gun was still amazingly light.

Oh yeah I used this gun with a 2hp 33 gallon air compressor that puts out 8.6CFM @ 40psi, and so the air consumption was barely noticeable, which was great, because my compressor wasnt running all the time.

Pretty much a great gun for the price."
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Oct 15, 2007
#5
  • Oct 15, 2007
  • #5
2K Primer is thick and it uses and activator...it is good stuff. 1.3 or 1.4mm tip is a little bit too big for paint, but you could probably use it, just dial down the amount of paint you are using and adjust the fan as well using the knobs on the gun. I think .8 and 1 is for paint and clear. I can't remember. I actually just use 1 tip for everything I spray and my cars always look great....(not being cocky) just being honest.
 
W

webshot

Member
Sep 11, 2005
738
0
17
Yay Area, California
Oct 15, 2007
#6
  • Oct 15, 2007
  • #6
Can you interchange tips? Sorry for all these questions for what seems like a do it or not no brainer type of project.

But I appreciate the answers.
 
You must log in or register to reply here.

Similar threads

S
Sandblasting at home
  • sj9ers
  • Oct 27, 2008
  • Classic Mustang Specific Tech
Replies
17
Views
15K
Classic Mustang Specific Tech Nov 15, 2008
RMODEL65
  • Locked
MUSTANG GT BUILD
  • duzy
  • Dec 5, 2011
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
30
Views
3K
1996 - 2004 SN95 Mustang -General/Talk- Dec 11, 2011
san~man
S
Air Compreesor Question
  • curtisboyte
  • Aug 31, 2008
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
928
1965 - 1973 Classic Mustangs -General/Talk- Sep 2, 2008
jlangholzj
W
auto paint gun choices
  • webshot
  • Nov 7, 2007
  • Fox 5.0 Mustang Tech
Replies
15
Views
2K
Fox 5.0 Mustang Tech Nov 11, 2007
importhater5.0
I
A question for you 2nd Amendment folks...
  • BlownFiveLiter
  • Dec 8, 2006
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
28
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 10, 2006
turbogt
T
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?