PCV Help

[95Cobra302]

Does anybody have a good pic of what the screen element below the pcv grommet looks like. I pulled my valve and grommet out and felt around but i didn't feel anything.

 

[legalize420]

Does anybody have a good pic of what the screen element below the pcv grommet looks like. I pulled my valve and grommet out and felt around but i didn't feel anything.

http://www.latemodelrestoration.com/lrs.aspx?ref=mu&gotopage=/content_50_home.aspx



it might be in there all the way at the bottom

 

[legalize420]

link wont work for some reason, go to 50resto.com and search for pcv then scroll down a little bit

 

[18mustangs]

Does anybody have a good pic of what the screen element below the pcv grommet looks like. I pulled my valve and grommet out and felt around but i didn't feel anything.

I found it easiest to use a metal pick to reach down into the PCV hole and pull the filter out if the lower intake is on the car. If not needle nose pliers will also work well. Here's what the screen looks like.
Tim

 

[95Cobra302]

Allright, I'll give it a try tomorrow thanks. Can u pick those up at the dealership?

 

[sunil6784]

Yup, you can. Most carry them in stock all the time.

 

[HISSIN50]

Tim is right on. Other methods of screen removal are a magnet or a long drywall screw. I use a pair or long needle nose pliers myself.

Good luck.